Design of multi-stopband metamaterial plates for absorption of broadband elastic waves and vibration

Hao Peng; P. Frank Pai

doi:10.1117/12.2084197

23 March 2015 Design of multi-stopband metamaterial plates for absorption of broadband elastic waves and vibration

Hao Peng, P. Frank Pai

Proceedings Volume 9438, Health Monitoring of Structural and Biological Systems 2015; 94380X (2015) https://doi.org/10.1117/12.2084197
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2015, San Diego, California, United States

Abstract

This paper presents the modeling technique, working mechanism and design guidelines for acoustic multi-stopband metamaterial plates for broadband elastic wave absorption and vibration suppression. The metamaterial plate is designed by integrating two-DOF (degree of freedom) mass-spring subsystems with an isotropic plate to act as vibration absorbers. For an infinite metamaterial plate without damping, a unit cell is modeled using the extended Hamilton’s principle, and two stopbands are obtained by dispersion analysis on the averaged three-DOF model. For a finite metamaterial plate with boundary conditions and damping, shear-deformable conforming plate elements are used to model the whole plate, and stopbands and their dynamic effects are investigated by frequency response analysis and transient analysis by direct numerical integration. Influences of absorbers’ resonant frequencies and damping ratios, plate’s boundary conditions and dimensions, and working plate-absorber modes are thoroughly investigated. Results show that the metamaterial plate is essentially based on the concept of conventional vibration absorbers. The local resonance of the two-DOF subsystems generates two stopbands, and the inertial forces generated by the resonant vibrations of absorbers straighten the plate and attenuate/stop wave propagation. Each stopband’s bandwidth can be increased by increasing the absorber mass and/or reducing the isotropic plate’s unit cell mass. Moreover, a high damping ratio for the secondary absorber can combine the two stopbands into one wide stopband for vibration suppression, and a low damping ratio for the primary absorber warrants absorbers’ quick response to steady and/or transient excitations.

Citation Download Citation

Hao Peng and P. Frank Pai "Design of multi-stopband metamaterial plates for absorption of broadband elastic waves and vibration", Proc. SPIE 9438, Health Monitoring of Structural and Biological Systems 2015, 94380X (23 March 2015); https://doi.org/10.1117/12.2084197

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available