An investigation of the material and model parameters for a constitutive model for MSMAs

Jason Dikes; Heidi Feigenbaum; Constantin Ciocanel

doi:10.1117/12.2084359

3 April 2015 An investigation of the material and model parameters for a constitutive model for MSMAs

Jason Dikes, Heidi Feigenbaum, Constantin Ciocanel

Proceedings Volume 9435, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2015; 943539 (2015) https://doi.org/10.1117/12.2084359
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2015, San Diego, California, United States

Abstract

A two dimensional constitutive model capable of predicting the magneto-mechanical response of a magnetic shape memory alloy (MSMA) has been developed and calibrated using a zero field-variable stress test¹. This calibration approach is easy to perform and facilitates a faster evaluation of the three calibration constants required by the model (vs. five calibration constants required by previous models^2,3). The calibration constants generated with this approach facilitate good model predictions of constant field-variable stress tests, for a wide range of loading conditions¹. However, the same calibration constants yield less accurate model predictions for constant stress-variable field tests. Deployment of a separate calibration method for this type of loading, using a varying field-zero stress calibration test, also didn’t lead to improved model predictions of this loading case. As a result, a sensitivity analysis was performed on most model and material parameters to identify which of them may influence model predictions the most, in both types of loading conditions. The sensitivity analysis revealed that changing most of these parameters did not improve model predictions for all loading types. Only the anisotropy coefficient was found to improve significantly field controlled model predictions and slightly worsen model predictions for stress controlled cases. This suggests that either the value of the anisotropy coefficient (which is provided by the manufacturer) is not accurate, or that the model is missing features associated with the magnetic energy of the material.

Citation Download Citation

Jason Dikes, Heidi Feigenbaum, and Constantin Ciocanel "An investigation of the material and model parameters for a constitutive model for MSMAs", Proc. SPIE 9435, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2015, 943539 (3 April 2015); https://doi.org/10.1117/12.2084359

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available