Paper
22 June 2015 Expanded beam spectro-ellipsometry for big area on-line monitoring
M. Fried, C. Major, G. Juhasz, P. Petrik, Z. Horvath
Author Affiliations +
Abstract
Non-destructive analysing tools are needed at all stages of thin film process-development, especially photovoltaic (PV) development, and on production lines. In the case of thin films, layer thicknesses, micro-structure, composition, layer optical properties, and their uniformity are important parameters. An important focus is to express the dielectric functions of each component material in terms of a handful of wavelength independent parameters whose variation can cover all process variants of that material. With the resulting database, spectroscopic ellipsometry coupled with multilayer analysis can be developed for on-line point-by-point mapping and on-line line-by-line imaging. Off-line point-by-point mapping can be effective for characterization of non-uniformities in full scale PV panels or big area (even 450 mm diameter) Si-wafers in developing labs but it is slow in the on-line mode when only 15 points can be obtained (within 1 min) as a 120 cm long panel moves by the mapping station. Last years [M. Fried et al, Thin Solid Films 519, 2730 (2011)], a new instrumentation was developed that provides a line image of spectroscopic ellipsometry (wl=350- 1000 nm) data. Earlier a single 30 point line image could be collected in 10 s over a 15 cm width of PV material. Recent years we have built a 30, a 45 and a 60 cm width expanded beam ellipsometer which speed is increased by 10x. Now, 1800 points can be mapped in a 1 min traverse of a 60*120 cm PV panel or flexible roll-to-roll substrate.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Fried, C. Major, G. Juhasz, P. Petrik, and Z. Horvath "Expanded beam spectro-ellipsometry for big area on-line monitoring", Proc. SPIE 9525, Optical Measurement Systems for Industrial Inspection IX, 95251S (22 June 2015); https://doi.org/10.1117/12.2184713
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photovoltaics

Thin films

Zinc oxide

Amorphous silicon

Calibration

Solar cells

Time metrology

RELATED CONTENT

Oxide-based materials by atomic layer deposition
Proceedings of SPIE (February 24 2017)
Current Status Of Photovoltaic Research At SERI
Proceedings of SPIE (February 23 1987)
Methodology and systems to ensure reliable thin-film PV modules
Proceedings of SPIE (September 10 2008)
Textured, doped, ZnO thin films produced by a new process...
Proceedings of SPIE (September 11 2007)
Third generation photovoltaics
Proceedings of SPIE (August 20 2009)
Hysteresis in pentacene-based organic thin-film transistors
Proceedings of SPIE (September 19 2006)

Back to Top