Paper
11 October 2015 Nano alumina slurries for improved polishing on thermoset and thermoplastic resins
Abigail R. Hooper, Christopher C. Boffa, Harry W. Sarkas
Author Affiliations +
Proceedings Volume 9633, Optifab 2015; 963305 (2015) https://doi.org/10.1117/12.2196058
Event: SPIE Optifab, 2015, Rochester, New York, United States
Abstract
Cerium oxide, because of its commonality to the optical workshop, is often used as the go-to abrasive for polishing many different substrates. For silica containing substrates, cerium oxide is an excellent abrasive choice because it allows for both chemical and mechanical polishing. However, plastic lenses do not contain silica and thereby cannot undergo the same chemical reaction with cerium oxide. These substrates are also very vulnerable to sleeks and scratches, and the tabular cerium oxide can impart defects into the surface resulting in scratch-dig failures and higher than expected surface roughness values. With the recent market push for plastic optical components, selection of an appropriate polishing slurry is critical to maintaining a competitive edge in the market and a profitable business.

In this paper, the authors will show how using an aluminum oxide can improve performance on thermoset and thermoplastic resins like polycarbonate, Zeonex® and Acrylica. The shape of the aluminum oxide allows for reduced defectivity while the high hardness of the abrasive allows for a removal rate tunable to the substrate hardness.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Abigail R. Hooper, Christopher C. Boffa, and Harry W. Sarkas "Nano alumina slurries for improved polishing on thermoset and thermoplastic resins", Proc. SPIE 9633, Optifab 2015, 963305 (11 October 2015); https://doi.org/10.1117/12.2196058
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Particles

Polishing

Oxides

Surface finishing

Cerium

Solids

Surface roughness

RELATED CONTENT

Results of a polishing study for SCHOTT XLD glasses
Proceedings of SPIE (September 24 2015)
Deterministic polishing from theory to practice
Proceedings of SPIE (October 11 2015)
Fluid jet polishing: removal process analysis
Proceedings of SPIE (September 06 1999)
The distribution of subsurface damage in fused silica
Proceedings of SPIE (February 07 2006)

Back to Top