Paper
9 March 2016 High-power fiber laser based on a non filamented-core fully-aperiodic large pitch fiber
A. Benoit, R. Dauliat, D. Darwich, R. Jamier, S. Grimm, Jens Kobelke, K. Schuster, P. Roy
Author Affiliations +
Abstract
In this communication, the authors report on the first high power emission obtained using a solid non-filamented core fully-aperiodic large pitch fiber manufactured by the REPUSIL method which is based on the sintering and vitrification of micrometric doped silica powders. Using a simple laser cavity, an average output power of 252 W was achieved for the first time in such a fiber with an available pump power of 400 W, corresponding to an optical-to-optical efficiency of 63 %. The M2 measurements have shown an excellent beam quality with values close to 1.4 at full power and lower than 1.3 for signal power lower than 215 W.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Benoit, R. Dauliat, D. Darwich, R. Jamier, S. Grimm, Jens Kobelke, K. Schuster, and P. Roy "High-power fiber laser based on a non filamented-core fully-aperiodic large pitch fiber", Proc. SPIE 9728, Fiber Lasers XIII: Technology, Systems, and Applications, 97280H (9 March 2016); https://doi.org/10.1117/12.2212622
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Refractive index

High power fiber lasers

Near field

Cladding

Silica

Fiber lasers

Glasses

RELATED CONTENT

High peak power fiber laser based on a non filamented...
Proceedings of SPIE (February 22 2017)
Opportunities in high-power fiber lasers
Proceedings of SPIE (October 02 2006)
Progress in high-power fiber lasers
Proceedings of SPIE (June 07 2004)
Fiber design for high-power fiber lasers
Proceedings of SPIE (February 19 2009)

Back to Top