Enabling quantitative optical imaging for in-die-capable critical dimension targets

B. M. Barnes; M.-A. Henn; M. Y. Sohn; H. Zhou; R. M. Silver

doi:10.1117/12.2221920

25 March 2016 Enabling quantitative optical imaging for in-die-capable critical dimension targets

B. M. Barnes, M.-A. Henn, M. Y. Sohn, H. Zhou, R. M. Silver

Proceedings Volume 9778, Metrology, Inspection, and Process Control for Microlithography XXX; 97780Y (2016) https://doi.org/10.1117/12.2221920
Event: SPIE Advanced Lithography, 2016, San Jose, California, United States

Abstract

Dimensional scaling trends will eventually bring semiconductor critical dimensions (CDs) down to only a few atoms in width. New optical techniques are required to address the measurement and variability for these CDs using sufficiently small in-die metrology targets. Recently, Qin et al. [Light Sci Appl, 5, e16038 (2016)] demonstrated quantitative modelbased measurements of finite sets of lines with features as small as 16 nm using 450 nm wavelength light. This paper uses simulation studies, augmented with experiments at 193 nm wavelength, to adapt and optimize the finite sets of features that work as in-die-capable metrology targets with minimal increases in parametric uncertainty. A finite element based solver for time-harmonic Maxwell’s equations yields two- and three-dimensional simulations of the electromagnetic scattering for optimizing the design of such targets as functions of reduced line lengths, fewer number of lines, fewer focal positions, smaller critical dimensions, and shorter illumination wavelength. Metrology targets that exceeded performance requirements are as short as 3 μm for 193 nm light, feature as few as eight lines, and are extensible to sub-10 nm CDs. Target areas measured at 193 nm can be fifteen times smaller in area than current state-of-the-art scatterometry targets described in the literature. This new methodology is demonstrated to be a promising alternative for optical model-based in-die CD metrology.

Citation Download Citation

B. M. Barnes, M.-A. Henn, M. Y. Sohn, H. Zhou, and R. M. Silver "Enabling quantitative optical imaging for in-die-capable critical dimension targets", Proc. SPIE 9778, Metrology, Inspection, and Process Control for Microlithography XXX, 97780Y (25 March 2016); https://doi.org/10.1117/12.2221920

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available