Mechanical blind gap measurement tool for alignment of the JWST Optical Telescope Element

Till Liepmann

doi:10.1117/12.2238576

27 September 2016 Mechanical blind gap measurement tool for alignment of the JWST Optical Telescope Element

Till Liepmann

Proceedings Volume 9951, Optical System Alignment, Tolerancing, and Verification X; 99510G (2016) https://doi.org/10.1117/12.2238576
Event: SPIE Optical Engineering + Applications, 2016, San Diego, California, United States

Abstract

This paper describes a novel gap gauge tool that is used to provide an independent check of the James Webb Space Telescope (JWST) Optical Telescope Element (OTE) primary mirror alignment. Making accurate measurements of the mechanical gaps between the OTE mirror segments is needed to verify that the segments were properly aligned relative to each other throughout the integration and test of the 6.6 meter telescope. The gap between the Primary Mirror Segment Assemblies (PMSA) is a sensitive indicator of the relative clocking and decenter. Further, the gap measurements are completely independent of all the other measurements use in the alignment process (e.g. laser trackers and laser radar). The gap measurement is a challenge, however, that required a new approach. Commercial gap measurements tools were investigated; however no suitable solution is available. The challenge of this measurement is due to the required 0.1 mm accuracy, the close spacing of the mirrors segments (approximately 3-9mm), the acute angle between the segment sides (approximately 4 degrees), and the difficult access to the blind gap. Several techniques were considered and tested before selecting the gauge presented here. This paper presents the theory, construction and calibration of the JWST gap gauge that is being used to measure and verify alignment of the OTE primary mirror segments.

Conference Presentation

Citation Download Citation

Till Liepmann "Mechanical blind gap measurement tool for alignment of the JWST Optical Telescope Element", Proc. SPIE 9951, Optical System Alignment, Tolerancing, and Verification X, 99510G (27 September 2016); https://doi.org/10.1117/12.2238576

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available