Presentation + Paper
30 September 2016 Pilot production and advanced development of large-area picosecond photodetectors
Michael J. Minot, Bernhard W. Adams, Melvin Aviles, Justin L. Bond, Christopher A. Craven, Till Cremer, Michael R. Foley, Alexey Lyashenko, Mark A. Popecki, Michael E. Stochaj, William A. Worstell, Anil U. Mane, Jeffrey W. Elam, Oswald H. W. Siegmund, Camden Ertley, Henry Frisch, Andrey Elagin
Author Affiliations +
Abstract
We report pilot production and advanced development performance results achieved for Large Area Picosecond Photodetectors (LAPPD). The LAPPD is a microchannel plate (MCP) based photodetector, capable of imaging with single-photon sensitivity at high spatial and temporal resolutions in a hermetic package with an active area of 400 square centimeters. In December 2015, Incom Inc. completed installation of equipment and facilities for demonstration of early stage pilot production of LAPPD. Initial fabrication trials commenced in January 2016. The “baseline” LAPPD employs an all-glass hermetic package with top and bottom plates and sidewalls made of borosilicate float glass. Signals are generated by a bi-alkali Na2KSb photocathode and amplified with a stacked chevron pair of “next generation” MCPs produced by applying resistive and emissive atomic layer deposition coatings to borosilicate glass capillary array (GCA) substrates. Signals are collected on RF strip-line anodes applied to the bottom plates which exit the detector via pinfree hermetic seals under the side walls. Prior tests show that LAPPDs have electron gains greater than 107, submillimeter space resolution for large pulses and several mm for single photons, time resolutions of 50 picoseconds for single photons, predicted resolution of less than 5 picoseconds for large pulses, high stability versus charge extraction, and good uniformity. LAPPD performance results for product produced during the first half of 2016 will be reviewed. Recent advances in the development of LAPPD will also be reviewed, as the baseline design is adapted to meet the requirements for a wide range of emerging application. These include a novel ceramic package design, ALD coated MCPs optimized to have a low temperature coefficient of resistance (TCR) and further advances to adapt the LAPPD for cryogenic applications using Liquid Argon (LAr). These developments will meet the needs for DOE-supported RD for the Deep Underground Neutrino Experiment (DUNE), nuclear physics applications such as EIC, medical, homeland security and astronomical applications for direct and indirect photon detection.
Conference Presentation
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael J. Minot, Bernhard W. Adams, Melvin Aviles, Justin L. Bond, Christopher A. Craven, Till Cremer, Michael R. Foley, Alexey Lyashenko, Mark A. Popecki, Michael E. Stochaj, William A. Worstell, Anil U. Mane, Jeffrey W. Elam, Oswald H. W. Siegmund, Camden Ertley, Henry Frisch, and Andrey Elagin "Pilot production and advanced development of large-area picosecond photodetectors", Proc. SPIE 9968, Hard X-Ray, Gamma-Ray, and Neutron Detector Physics XVIII, 99680X (30 September 2016); https://doi.org/10.1117/12.2237331
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Microchannel plates

Glasses

Sensors

Photodetectors

Atomic layer deposition

Picosecond phenomena

Ceramics

Back to Top