Paper
19 October 2016 Development of slab amplifiers for integration-test-bed
Yuanbin Chen, Jianguo Liu, Yong Liu, Lin Chen, Kuixing Zheng, Xiaofeng Wei, Wanguo Zheng
Author Affiliations +
Proceedings Volume 10152, High Power Lasers, High Energy Lasers, and Silicon-based Photonic Integration; 101521G (2016) https://doi.org/10.1117/12.2248419
Event: International Symposium on Optoelectronic Technology and Application 2016, 2016, Beijing, China
Abstract
Integration-Test-Bed(ITB) is China's first laser devices with single-beam ten-thousand joules output for Inertial Confinement Fusion (ICF) research. In this paper we describe the development of single-segment slab amplifiers for Integration-Test-Bed (ITB) with 400mm× 400mm aperture. The experiment results shows that the average small signal gain coefficient in 400mm×400mm aperture reach 5.28%/cm with the gain uniformity is about 1.09:1(maximum value/ average value), and up to 1.063:1 (maximum value/ average value) in 360mm×360mm beam-diameter clear aperture. The storage efficiency of system is about 1.47%. The pump-induced wave-front distortion is 5.3λ for the laser beams, which within the correction range of deformable mirror; the thermal recovery time was less than 4 hours. All of this guaranteed the output of 19.6kJ/5ns with wavelength of 1053nm from the Integration-Test-Bed (ITB) device.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yuanbin Chen, Jianguo Liu, Yong Liu, Lin Chen, Kuixing Zheng, Xiaofeng Wei, and Wanguo Zheng "Development of slab amplifiers for integration-test-bed", Proc. SPIE 10152, High Power Lasers, High Energy Lasers, and Silicon-based Photonic Integration, 101521G (19 October 2016); https://doi.org/10.1117/12.2248419
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Amplifiers

Thermal effects

Back to Top