Paper
19 October 2016 Synthetic aperture LADAR at 1550 nm: system demonstration, imaging processing and experimental result
Guangzuo Li, Ran Wang, Peisi Wang, Keshu Zhang, Yirong Wu
Author Affiliations +
Proceedings Volume 10155, Optical Measurement Technology and Instrumentation; 101553G (2016) https://doi.org/10.1117/12.2247376
Event: International Symposium on Optoelectronic Technology and Application 2016, 2016, Beijing, China
Abstract
In this manuscript, we propose and experimentally demonstrate our synthetic aperture LADAR (SAL) system. The system could obtain imageries in a few milliseconds with resolution of 5 cm from a long distance. Fine resolution in the range dimension was obtained by transmitting LADAR signal with large bandwidth. While in the cross-range dimension, the large synthetic aperture diameter provided fine resolution. By employing continuous translational motion of SAL system, a large aperture diameter was obtained through synthetic aperture processing. So the diffraction limit of real aperture diameter was overcome and finer resolution was achieved. Indoor and outdoor experiments were both performed and the corresponding results were showed. Results validated the feasibility of our system and processing algorithm.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guangzuo Li, Ran Wang, Peisi Wang, Keshu Zhang, and Yirong Wu "Synthetic aperture LADAR at 1550 nm: system demonstration, imaging processing and experimental result", Proc. SPIE 10155, Optical Measurement Technology and Instrumentation, 101553G (19 October 2016); https://doi.org/10.1117/12.2247376
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
LIDAR

Image processing

Imaging systems

Pulse filters

RELATED CONTENT

Novel multifunction 2-um imaging laser radar system
Proceedings of SPIE (December 15 1999)
Scannerless terrain mapper
Proceedings of SPIE (October 28 1996)

Back to Top