|
Liquid lenticular multi-view system has great potential of three dimensional image realization. This paper aims to introduce a novel fabrication method of electro-wetting liquid lenticular lens using diffuser. The liquid lenticular device consists of a Ultraviolet (UV) adhesive chamber, two immiscible liquids and a sealing plate. The diffuser makes UV light spread slantly not directly to negative photoresist on a glass substrate. In this process, Su-8, the suitable material to fabricate a structure in high stature, is selected for negative photoresist. After forming a Su-8 chamber, the UV adhesive chamber is made through a PDMS sub-chamber that is made from the Su-8 chamber. As such, this research shows a result of a liquid lenticular lens having slanted side walls with an angle of 75 degrees. The UV adhesive chamber having slanted side walls is more advantageous for electro-wetting effect achieving high diopter than the chamber having vertical side walls. After that, gold is evaporated for electrode, and Parylene C and Teflon AF1600 is deposited for dielectric and hydrophobic layer respectively. For two immiscible liquids, DI water and a blend of 1-Chloronaphthalene and Dodecane with specific portions are used. Two immiscible liquids are injected in underwater environment and a glass that is coated with ITO on one side is sealed by UV adhesive. The completed tunable lenticular lens can switch two and three dimensional images by using electro-wetting principle that changes surface tensions by applying voltage. Also, dioptric power and response time of the liquid lenticular lens array are measured.
|
