Control of pulse format in high energy per pulse all-fiber erbium/ytterbium laser systems

Michael Klopfer; Matthew K. Block; James Deffenbaugh; Zak G. Fitzpatrick; Michael T. Urioste; Leanne J. Henry; Ravinder Jain

doi:10.1117/12.2248910

20 February 2017 Control of pulse format in high energy per pulse all-fiber erbium/ytterbium laser systems

Michael Klopfer, Matthew K. Block, James Deffenbaugh, Zak G. Fitzpatrick, Michael T. Urioste, Leanne J. Henry, Ravinder Jain

Author Affiliations +

Proceedings Volume 10090, Laser Resonators, Microresonators, and Beam Control XIX; 100901N (2017) https://doi.org/10.1117/12.2248910
Event: SPIE LASE, 2017, San Francisco, California, United States

Abstract

A multi-stage linearly polarized (PM) (15 dB) pulsed fiber laser system at 1550 nm capable of operating at repetition rates between 3 and 20 kHz was investigated. A narrow linewidth seed source was linewidth broadened to approximately 20 GHz and pulses were created and shaped via an electro-optic modulator (EOM) in conjunction with a home built arbitrary waveform generator. As expected, a high repetition rate pulse train with a near diffraction limited beam quality (M2~1.12) was achieved. However, the ability to store energy was limited by the number of active ions within the erbium/ytterbium doped gain fiber within the various stages. As a result, the maximum energy per pulse achievable from the system was approximately 0.3 and 0.38 mJ for 300 ns and 1 μs pulses, respectively, at 3 kHz. Because the system was operated at high inversion, the erbium/ytterbium doped optical fiber preferred to lase at 1535 nm versus 1550 nm resulting in amplified spontaneous emission (ASE) both intra- and inter-pulse. For the lower power stages, the ASE was controllable via a EOM whose function was to block the energy between pulses as well as ASE filters whose purpose was to block spectral components outside of the 1550 nm passband. For the higher power stages, the pump diodes were pulsed to enable strategic placement of an inversion resulting in higher intrapulse energies as well as an improved spectrum of the signal. When optimized, this system will be used to seed higher power solid state amplifier stages.

Conference Presentation

Citation Download Citation

Michael Klopfer, Matthew K. Block, James Deffenbaugh, Zak G. Fitzpatrick, Michael T. Urioste, Leanne J. Henry, and Ravinder Jain "Control of pulse format in high energy per pulse all-fiber erbium/ytterbium laser systems", Proc. SPIE 10090, Laser Resonators, Microresonators, and Beam Control XIX, 100901N (20 February 2017); https://doi.org/10.1117/12.2248910

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available