Experimental investigation of wave dispersion in hardened concrete and reference liquid media

Sokratis N. Iliopoulos; Fabian Malm; Christian U. Grosse; Dimitrios G. Aggelis

doi:10.1117/12.2261664

19 April 2017 Experimental investigation of wave dispersion in hardened concrete and reference liquid media

Sokratis N. Iliopoulos, Fabian Malm, Christian U. Grosse, Dimitrios G. Aggelis

Proceedings Volume 10171, Smart Materials and Nondestructive Evaluation for Energy Systems 2017; 101710O (2017) https://doi.org/10.1117/12.2261664
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2017, Portland, Oregon, United States

Abstract

Nowadays, more and more, the monitoring of concrete’s setting and hardening as well as concrete’s condition assessment and mechanical characterization is realized with the Ultrasonic Pulse Velocity technique. However, despite its increasing use, the high potential and the vast applicability over a wide range of materials and structures, the aforementioned nondestructive testing technique is only partially exploited since a) a default pulse usually not selected by the user is transmitted, b) a single frequency band dependent on the testing equipment (pulse generator and sensors) is excited and c) usually the first part of the signal is only considered. Moreover, the technique, as defined by its name, is based on pulse velocity measurements which strongly rely on a predefined threshold value for the calculation of the travel time between the transmitting and receiving sensor. To overcome all these issues, in the current experimental campaign, user-defined signals are generated, a broad range of ultrasonic frequencies is excited, while the full length of the signal is also taken into account. In addition, the pulse velocity measurements are replaced by the more advanced phase velocity calculations determined by reference phase points of the time domain signals or by phase differences of the signals transformed in the frequency domain. The experiments are mainly conducted in hardened concrete specimens but the aggregates are substituted by spherical glass beads of well-defined sizes and contents in order to better control the microstructure. Reference liquid media are also examined for comparison purposes. The results in both cases show strong dispersive trends indicated by significant changes in the phase velocity.

Citation Download Citation

Sokratis N. Iliopoulos, Fabian Malm, Christian U. Grosse, and Dimitrios G. Aggelis "Experimental investigation of wave dispersion in hardened concrete and reference liquid media", Proc. SPIE 10171, Smart Materials and Nondestructive Evaluation for Energy Systems 2017, 101710O (19 April 2017); https://doi.org/10.1117/12.2261664

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available