Paper
3 May 2017 Development of optical ceramic materials for infrared applications by optimizing sintering conditions
Masafumi Isogai, Masahiko Sano
Author Affiliations +
Abstract
The authors developed production process of polycrystalline Zinc Sulfide (ZnS) materials which have been widely applied to windows and domes for infrared sensor systems. Commercially available ZnS powders of ca. 5 um particle sizes were used as a starting material and Spark Plasma Sintering method (SPS) was applied to the powders for firing process. It was found that the densification of the sintered materials was inhibited by outgassing from ZnS powders during the sintering process (ca. 400 Celsius). Thermal desorption spectroscopy analyses revealed the components of outgassing, such as hydrogen sulfide, sulfur oxide and organic molecules. Based on these analyses, the optimum conditions on heating rate and starting temperature of uniaxial pressurization were investigated to remove the outgassing. The polycrystalline ZnS materials fired under the optimized SPS conditions have such characteristics as better transmittance than 65 % and good uniformity in both 3 - 5 um and 8 - 12 um wavelength regions. These results show the importance of removing outgassing from starting materials.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Masafumi Isogai and Masahiko Sano "Development of optical ceramic materials for infrared applications by optimizing sintering conditions", Proc. SPIE 10179, Window and Dome Technologies and Materials XV, 101790L (3 May 2017); https://doi.org/10.1117/12.2262416
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Zinc

Particles

Transmittance

Chemical vapor deposition

Plasma

Scanning electron microscopy

Ceramics

RELATED CONTENT


Back to Top