Simulation of the influence of line edge roughness on the performance of deep ultraviolet wire grid polarizers

Thomas Siefke; Carol B. Rojas Hurtado; Johannes Dickmann; Martin Heusinger; Stefanie Kroker

doi:10.1117/12.2269602

26 June 2017 Simulation of the influence of line edge roughness on the performance of deep ultraviolet wire grid polarizers

Thomas Siefke, Carol B. Rojas Hurtado, Johannes Dickmann, Martin Heusinger, Stefanie Kroker

Author Affiliations +

Proceedings Volume 10330, Modeling Aspects in Optical Metrology VI; 103300S (2017) https://doi.org/10.1117/12.2269602
Event: SPIE Optical Metrology, 2017, Munich, Germany

Abstract

Controlling the polarization of light is crucial in numerous applications such as spectroscopy, ellipsometry, photo lithography or industrial vision. Polarization control can be realized by wire grid polarizers (WGPs), which are large aspect ratio, zero order gratings. These elements provide an anisotropic transmittance depending on the polarization direction of the incident light. WGPs’ high attractiveness originates from their large free aperture, while simultaneously being extremely thin. Furthermore, these elements can be easily integrated into other nano-optical devices. Recently, such elements were successfully developed for applications down to the deep ultra violet spectral range. However, at shorter wavelengths the influence of roughness of the structures poses a severe limitation on the feasible optical performance. To tackle this problem, we numerically simulated the impact of line edge roughness on the polarization properties of WPGs. Therefore, we generated edge position data of rough grating lines by means of the Thorsos method and calculated the resulting optical response by finite difference time domain method. With this procedure the influence of standard deviation, correlation length, Hurst exponents and wavelength was investigated. We find that for standard deviations of 2.5 nm and 5.0 nm the polarization contrast is reduced by a factor of 3 and 7, respectively. The polarization contrast shows a minimum for intermediate correlation lengths, while virtually no impact of the Hurst exponent is observed. This is explained by several mechanisms occurring for different ratios between the spatial frequency of the roughness and the frequency of incident light. Our theoretical findings correlate well with experimental results we retrieved with measured roughness parameters of fabricated elements.

Citation Download Citation

Thomas Siefke, Carol B. Rojas Hurtado, Johannes Dickmann, Martin Heusinger, and Stefanie Kroker "Simulation of the influence of line edge roughness on the performance of deep ultraviolet wire grid polarizers", Proc. SPIE 10330, Modeling Aspects in Optical Metrology VI, 103300S (26 June 2017); https://doi.org/10.1117/12.2269602

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available