Paper
4 August 2010 Verification of the observatory integrated model for the JWST
Author Affiliations +
Abstract
The JWST optical performance verification poses challenges not yet encountered in space-based telescopes. In particular the large, lightweight deployable optics pose challenges to verification via direct measurement of the observatory on earth. For example, the lightweight optics have surface distortion due to gravity producing wavefront error greater than the wavefront error specification for the entire observatory. Because of difficulties such as this, the deployable, segmented Primary Mirror and deployable Secondary Mirror will be realigned after launch. The architecture of JWST was designed to accommodate these difficulties as these by including active positioning of the primary mirror segments and secondary. In fact, the requirements are written such that the active control system shall be used to meet the requirements. Therefore many of the optical requirements are necessarily based on modeling and simulations. This requires that the models used to predict the optical performance be verified and validated. This paper describes the validation approach taken and a companion paper describes the optical performance analyses1.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. Scott Knight, Paul Lightsey, and Allison Barto "Verification of the observatory integrated model for the JWST", Proc. SPIE 7738, Modeling, Systems Engineering, and Project Management for Astronomy IV, 773815 (4 August 2010); https://doi.org/10.1117/12.858349
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Data modeling

James Webb Space Telescope

Optical alignment

Observatories

Motion models

Adaptive optics

RELATED CONTENT

E-ELT vibration modeling, simulation, and budgeting
Proceedings of SPIE (July 05 2016)
System analysis tools for an ELT at ESO
Proceedings of SPIE (June 23 2006)
Integrated telescope model for the James Webb Space Telescope
Proceedings of SPIE (September 25 2012)
Non invasive optical end to end test of a large...
Proceedings of SPIE (August 26 2009)
Observatory alignment of the James Webb Space Telescope
Proceedings of SPIE (September 21 2012)

Back to Top