Paper
22 March 2010 Particle protection capability of SEMI-compliant EUV-pod carriers
Author Affiliations +
Abstract
With the projected rollout of pre-production extreme ultraviolet lithography (EUVL) scanners in 2010, EUVL pilot line production will become a reality in wafer fabrication companies. Among EUVL infrastructure items that must be ready, EUV mask carriers remain critical. To keep non-pellicle EUV masks free from particle contamination, an EUV pod concept has been extensively studied. Early prototypes demonstrated nearly particle-free results at a 53 nm PSL equivalent inspection sensitivity during EUVL mask robotic handling, shipment, vacuum pump-purge, and storage. After the passage of SEMI E152, which specifies the EUV pod mechanical interfaces, standards-compliant EUV pod prototypes, including a production version inner pod and prototype outer pod, were built and tested. Their particle protection capability results are reported in this paper. A state-of-the-art blank defect inspection tool was used to quantify their defect protection capability during mask robotic handling, shipment, and storage tests. To ensure the availability of an EUV pod for 2010 pilot production, the progress and preliminary test results of pre-production EUV outer pods are reported as well.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
George Huang, Long He, John Lystad, Tom Kielbaso, Cecilia Montgomery, and Frank Goodwin "Particle protection capability of SEMI-compliant EUV-pod carriers", Proc. SPIE 7636, Extreme Ultraviolet (EUV) Lithography, 763625 (22 March 2010); https://doi.org/10.1117/12.845957
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Extreme ultraviolet

Particles

Prototyping

Robotics

Extreme ultraviolet lithography

Photomasks

Reticles

RELATED CONTENT

Towards reduced impact of EUV mask defectivity on wafer
Proceedings of SPIE (July 28 2014)
Particle on EUV pellicles, impact on LWR
Proceedings of SPIE (October 09 2019)
NXE pellicle: development update
Proceedings of SPIE (September 26 2016)
Evaluation results of a new EUV reticle pod based on...
Proceedings of SPIE (March 20 2010)

Back to Top