Paper
7 May 2003 A vector DSP for digital media processors
Bret Bersack, John Redford, Matt Moniz, Michael Goldman
Author Affiliations +
Proceedings Volume 5022, Image and Video Communications and Processing 2003; (2003) https://doi.org/10.1117/12.479727
Event: Electronic Imaging 2003, 2003, Santa Clara, CA, United States
Abstract
A new chip using a DSP with a novel vector architecture is described. It uses a Very Dense Instruction Word (rather than a VLIW) and exploits the parallelism and narrow data typical of image processing to gain high performance at low cost and power. It contains eight 32-bit datapaths all working off a single instruction, and can do sixteen 16-bit MACs per cycle or four 32-bit memory accesses per cycle to 128 KB of on-chip memory. It also contains a serial datapath for handling low-performance code and OS functions. The chip includes memory, video and IO interfaces on an industry-standard bus. It also includes camera-specific IO such as videos DACs for NTSC/PAL and analog LCDs, an I2S audio interface, and USB 1.1. It is built in 0.18 um CMOS, runs at 233 MHz, and draws 300 mW. It uses no fixed-function blocks, microcode, or coprocessors, but can capture and compress video at 30 fps at VGA resolution using JPEG, or at CIF resolution using MPEG-4.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bret Bersack, John Redford, Matt Moniz, and Michael Goldman "A vector DSP for digital media processors", Proc. SPIE 5022, Image and Video Communications and Processing 2003, (7 May 2003); https://doi.org/10.1117/12.479727
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Digital signal processing

Video

Clocks

Information operations

Image processing

Interfaces

Logic

Back to Top