Paper
28 April 2008 Identification of external quantities using redistribution of optical power
Author Affiliations +
Abstract
At the present time there are a lot of optical fibers used by telecommunication companies for the data transmission. For the long-distance communications the single-mode fibers are being used for their promising values of parameters like attenuation and dispersion. These types of fibers are designed for the purpose of data transmission. The transmitted signal should not be affected by the external quantities. On the other side there are many types of optical fibers used as sensors. There are used in biomedicine, aerospace etc. The sensor types of optical fibers can not be used for data transmission because of their unappropriate values of attenuation and dispersion. The key idea of our research is to integrate both types of fibers into one fiber. The principle of sensing is based on redistribution of the optical power between individual modes around the cross-section of the end fiber-face. These fiber should preserve the significant parameters of telecommunication fibers and it should be able to measure some external quantities at he same time. This article shows the fundamental steps which must be done to operate the fiber as a sensor and the communication environment at the same time.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jan Skapa, Petr Siska, Vladimír Vasinek, and Jan Vanda "Identification of external quantities using redistribution of optical power", Proc. SPIE 7003, Optical Sensors 2008, 70031R (28 April 2008); https://doi.org/10.1117/12.780935
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Signal attenuation

Data transmission

Sensors

Single mode fibers

Spatial light modulators

Refractive index

Back to Top