Fabrication and performance of mercuric iodide pixellated detectors

Lodewijk van den Berg; Lloyd F. Bastian; Feng Zhang; Howard Lenos

doi:10.1117/12.740175

21 September 2007 Fabrication and performance of mercuric iodide pixellated detectors

Lodewijk van den Berg, Lloyd F. Bastian, Feng Zhang, Howard Lenos

Proceedings Volume 6706, Hard X-Ray and Gamma-Ray Detector Physics IX; 67060J (2007) https://doi.org/10.1117/12.740175
Event: Optical Engineering + Applications, 2007, San Diego, California, United States

Abstract

The radiation detection efficiency and spectral resolution of mercuric iodide detectors can be improved significantly by increasing the volume of the detectors and by using a pixellated anode structure. Detector bodies with a thickness of nominally 10 mm and an active area of approximately 14 mm x 14 mm have been used for these experiments. The detectors were cut from single crystals grown by the physical vapor transport method. The cut surfaces were polished and etched using a string saw and potassium iodide solutions. The Palladium contacts were deposited by magnetron sputtering through stainless steel masks. The cathode contact is continuous; the anode contacts consist of an array of 11 x 11 pixels surrounded by a guard ring. The resistance between a pixel and its surrounding contacts should be larger than 0.25 Gohm. The detector is mounted on a substrate that makes it possible to connect the anode pixels to an ASIC, and is conditioned so that it is stable for all pixels at a bias of -3000 Volts. Under these conditions the spectral resolution for Cs-137 gamma rays (662 keV) is approximately 5% FWHM. When depth sensing correction methods are applied, the resolution improves to about 2% FWHM or better. It is expected that the performance of the devices can be improved by the careful selection of crystal parts that are free of structural defects. Details of the fabrication technologies will be described. The effects of material inhomogeneities and transport properties of the charge carriers will be discussed.

Citation Download Citation

Lodewijk van den Berg, Lloyd F. Bastian, Feng Zhang, and Howard Lenos "Fabrication and performance of mercuric iodide pixellated detectors", Proc. SPIE 6706, Hard X-Ray and Gamma-Ray Detector Physics IX, 67060J (21 September 2007); https://doi.org/10.1117/12.740175

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available