Laser damage metrology in biaxial nonlinear crystals using different test beams

Anne Hildenbrand; Frank R. Wagner; Hassan Akhouayri; Jean-Yves Natoli; Mireille Commandre

doi:10.1117/12.752918

20 December 2007 Laser damage metrology in biaxial nonlinear crystals using different test beams

Anne Hildenbrand, Frank R. Wagner, Hassan Akhouayri, Jean-Yves Natoli, Mireille Commandre

Proceedings Volume 6720, Laser-Induced Damage in Optical Materials: 2007; 672017 (2007) https://doi.org/10.1117/12.752918
Event: Boulder Damage Symposium XXXIX: Annual Symposium on Optical Materials for High Power Lasers, 2007, Boulder, Colorado, United States

Abstract

Laser damage measurements in nonlinear optical crystals, in particular in biaxial crystals, may be influenced by several effects proper to these materials or greatly enhanced in these materials. Before discussion of these effects, we address the topic of error bar determination for probability measurements. Error bars for the damage probabilities are important because nonlinear crystals are often small and expensive, thus only few sites are used for a single damage probability measurement. We present the mathematical basics and a flow diagram for the numerical calculation of error bars for probability measurements that correspond to a chosen confidence level. Effects that possibly modify the maximum intensity in a biaxial nonlinear crystal are: focusing aberration, walk-off and self-focusing. Depending on focusing conditions, propagation direction, polarization of the light and the position of the focus point in the crystal, strong aberrations may change the beam profile and drastically decrease the maximum intensity in the crystal. A correction factor for this effect is proposed, but quantitative corrections are not possible without taking into account the experimental beam profile after the focusing lens. The characteristics of walk-off and self-focusing have quickly been reviewed for the sake of completeness of this article. Finally, parasitic second harmonic generation may influence the laser damage behavior of crystals. The important point for laser damage measurements is that the amount of externally observed SHG after the crystal does not correspond to the maximum amount of second harmonic light inside the crystal.

Citation Download Citation

Anne Hildenbrand, Frank R. Wagner, Hassan Akhouayri, Jean-Yves Natoli, and Mireille Commandre "Laser damage metrology in biaxial nonlinear crystals using different test beams", Proc. SPIE 6720, Laser-Induced Damage in Optical Materials: 2007, 672017 (20 December 2007); https://doi.org/10.1117/12.752918

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available