RET selection using rigorous, physics-based computational lithography

Sanjay Kapasi; Trey Graves; Mark D. Smith; Stewart Robertson; Chris Sallee

doi:10.1117/12.772872

4 March 2008 RET selection using rigorous, physics-based computational lithography

Sanjay Kapasi, Trey Graves, Mark D. Smith, Stewart Robertson, Chris Sallee

Proceedings Volume 6925, Design for Manufacturability through Design-Process Integration II; 69251D (2008) https://doi.org/10.1117/12.772872
Event: SPIE Advanced Lithography, 2008, San Jose, California, United States

Abstract

Over the past several years, choosing the best Resolution Enhancement Technique (RET) has become more and more difficult. The RET implementation team is faced with an ever increasing number of variables to attempt to optimize. Also, for a given node, there are now more layers designated as critical pattern layers requiring RET. As design rules become more aggressive, and scanners have more process parameters such as polarization and focus drilling, RET must be optimized across a larger number of variables than before. Sorting through the best combination of all of the available process parameters could potentially require the number of wafer experiments to increase exponentially. Rigorous, physics-based computational lithography is the perfect tool for executing the large number of experiments, virtually, culling out dramatically the actual number of physical wafer experiments required for verification. Ideally, first pass RET selection needs to be made as early as possible in the technology cycle, well before the equipment is available. Traditional OPC tools, which require wafer process data to set up are not suited to this task, as they can only be used after the equipment has been installed and a stable, established process exists. Rigorous physical and chemical models, such as those found in PROLITH, are better suited to early RET selection and optimization but the Windows platform, where PROLITH is used, is computationally too slow for the massive number of calculations required. In this study, we focus on the RET selection process for a set of "typical" critical test patterns, using KLATencor's other rigorous, physics-based computational lithography tool, LithoWare. LithoWare combines the accuracy of rigorous physical and chemical models with the computational power of distributed computing on Linux. We examine the use of cluster computing in optimizing the illuminators using model based OPC and process window analysis for critical contact hole (CH) patterns. We use the results to propose a comprehensive RET selection strategy to meet the user requirements of 45nm and 32 nm development.

Citation Download Citation

Sanjay Kapasi, Trey Graves, Mark D. Smith, Stewart Robertson, and Chris Sallee "RET selection using rigorous, physics-based computational lithography", Proc. SPIE 6925, Design for Manufacturability through Design-Process Integration II, 69251D (4 March 2008); https://doi.org/10.1117/12.772872

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available