PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
It has been one of the difficulties that high-precision hole on hardened materials is machined. The supersonic vibration
boring acoustic system in the lathe in which supersonic wave energy is applied on tool is introduced to create pulse
power on the cutting process. The separation vibration cutting is achieved by the pulse force. The comparative tests on
boring accuracy and surface quality are carried. The quality of surface machined by this method is compared to that by
grinding. This cutting is the green cutting. The boring process system is stability. Under the condition that the cutting
speed is less than or equal to 1/3 the tool vibration speed, the cutting force is pulse force and the Cutting energy is of
high concentration in time, space and direction. The pulse energy effects on the cutting unit in less than one ten-thousandth
second. Traditional cutting of irregular movement elastic compression are eliminated. The cutting force is
greatly reduced. The cutting temperature is at room temperature. The tool life is greatly increased. Shape precision and
surface quality is greatly improved. The regulations of the ultrasonic vibration boring dry cutting of hardened material
are also summarized. The test results show that the ultrasonic vibration cutting tool boring is of very superior cutting
mechanism and is a high-precision deep-hole machining of hardened materials, efficient cutting methods.
Jiangzhong Zhang,Heng Zhang, andYue Zhang
"Study on boring hardened materials dryly
by ultrasonic vibration cutter", Proc. SPIE 7997, Fourth International Seminar on Modern Cutting and Measurement Engineering, 799708 (24 May 2011); https://doi.org/10.1117/12.887550
ACCESS THE FULL ARTICLE
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The alert did not successfully save. Please try again later.
Jiangzhong Zhang, Heng Zhang, Yue Zhang, "Study on boring hardened materials dryly by ultrasonic vibration cutter," Proc. SPIE 7997, Fourth International Seminar on Modern Cutting and Measurement Engineering, 799708 (24 May 2011); https://doi.org/10.1117/12.887550