Carbon nanotube sheet actuator: theoretical and experimental investigations

Mohammad H. Haque; Ivica Kolaric; Uwe Vohrer; Thomas Wallmersperger; Bernd Kroeplin

doi:10.1117/12.539496

27 July 2004 Carbon nanotube sheet actuator: theoretical and experimental investigations

Mohammad H. Haque, Ivica Kolaric, Uwe Vohrer, Thomas Wallmersperger, Bernd Kroeplin

Proceedings Volume 5385, Smart Structures and Materials 2004: Electroactive Polymer Actuators and Devices (EAPAD); (2004) https://doi.org/10.1117/12.539496
Event: Smart Structures and Materials, 2004, San Diego, CA, United States

Abstract

In this paper we present experimental measurements as well as a theoretical model for the electro-mechanical behavior of single walled carbon nanotube (SWNT) sheet actuators. The SWNT material exhibits elongation and contraction of the carbon bond length due to electro-chemically induced surface charge and works at a relatively low operating voltage. The use of carbon nanotube sheet material sandwich with porous ceramic is a special feature of the presented work. In the experiment, two layers of SWNT with a ceramic layer in between were placed between two working-electrodes in an electrolyte solution bath. The counter electrode has been placed within the solution away from the composite. The charge transfer takes place between the working and the counter electrodes. The displacement of the composite was measured in the thickness direction, i.e. between the fixed and the mobile working electrodes. Depending on the applied voltage, different displacement values up to 0.8% of its original thickness were obtained. As influencing factors, the parameters such as applied electric field, thickness of the composite, solvent and electrode type were investigated. A clear dependency of the actuation on the applied potential was observed within the electro-chemical window. It is remarkable that an applied electric voltage exceeding the window leads to a hydrolysis of the solvent, i.e. generation of gas bubbles. In the theoretical part, a macroscopic model for the actuation of the SWNT material has been developed. A mechanical field equation which uses the applied electric potential as input gives the elongation and contraction of the material. Depending on the parameters given above, the time-behavior of the actuator has been simulated. Thus, by various numerical simulations and experimental investigations, the actuator-characteristic can be optimized. In conclusion, a good correlation between the experimental and the numerical results has been determined.

Citation Download Citation

Mohammad H. Haque, Ivica Kolaric, Uwe Vohrer, Thomas Wallmersperger, and Bernd Kroeplin "Carbon nanotube sheet actuator: theoretical and experimental investigations", Proc. SPIE 5385, Smart Structures and Materials 2004: Electroactive Polymer Actuators and Devices (EAPAD), (27 July 2004); https://doi.org/10.1117/12.539496

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available