980-nm picosecond ytterbium fiber laser

Suvi P. Karirinne; Janne Konttinen; Tomi Jouhti; Anatoly B. Grudinin; Oleg G. Okhotnikov

doi:10.1117/12.545068

1 September 2004 980-nm picosecond ytterbium fiber laser

Suvi P. Karirinne, Janne Konttinen, Tomi Jouhti, Anatoly B. Grudinin, Oleg G. Okhotnikov

Proceedings Volume 5460, Solid State Lasers and Amplifiers; (2004) https://doi.org/10.1117/12.545068
Event: Photonics Europe, 2004, Strasbourg, France

Abstract

Ultrafast lasers can be used to produce laser pulses with enormous peak powers and power densities. The very high peak power that can be achieved with femtosecond pulses means that in principle, nonlinear frequency conversion should be very efficient. It should be quite straightforward to use second-harmonic (SHG), third-harmonic (THG) and fourth-harmonic generation (FHG) to produce femtosecond pulses in the near- to deep-ultraviolet. We present results on a mode-locked Yb³⁺-fiber laser operating in the 980 nm spectral band. Such lasers are very attractive as a seed source for generating blue light using SHG. The laser comprised a linear fiber cavity defined by the fiber loop-mirror and the semiconductor saturable-absorber mirror (SESAM) used to self-start the mode-locking. SESAM operating in the 940-1050 nm wavelength-range comprised 26 pairs of AlAs/GaAs quarter-wave layers that form a distributed Bragg reflector with a center wavelength at about 1000 nm. The active region consists of five GaInNAs quantum wells embedded within GaAs layers. With proper alignment of the laser cavity, the laser was self-starting for pump powers above 50 mW at 915 nm. The output mode-locked pulse train at about 980 nm had an output power of 3 mW, a repetition rate of 30 MHz and pulse duration of 2.3 ps. The pulse spectrum exhibited soliton sidebands at all pump powers, confirming that the laser operates in the anomalous-dispersion regime. The time-bandwidth product was equal to 0.47, indicating that the pulses were nearly bandwidth-limited with Gaussian temporal and spectral profiles. The average value of the cavity dispersion near 1 µm, estimated from the soliton sidebands, was -1.6 ps². With a master oscillator power amplifier configuration (MOPA) more than 200 mW of the output power is expected with just two single-mode pump laser diodes.

Citation Download Citation

Suvi P. Karirinne, Janne Konttinen, Tomi Jouhti, Anatoly B. Grudinin, and Oleg G. Okhotnikov "980-nm picosecond ytterbium fiber laser", Proc. SPIE 5460, Solid State Lasers and Amplifiers, (1 September 2004); https://doi.org/10.1117/12.545068

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available