Paper
23 May 2005 Tin dioxide based optical sensor for in water ppm detection of ammonia at room temperature
Author Affiliations +
Proceedings Volume 5855, 17th International Conference on Optical Fibre Sensors; (2005) https://doi.org/10.1117/12.623837
Event: 17th International Conference on Optical Fibre Sensors, 2005, Bruges, Belgium
Abstract
In this work, preliminary experimental results on the capability of a Metal Oxides (MOXs) based optical sensor to perform ammonia detection in water environments, at room temperature, are presented. Electro-spray pyrolisis technique has been used to deposit the SnO2 films on the distal end of standard Silica Optical Fibers (SOFs). Reflection spectra of the sensing probes have been measured in the range 1520-1620nm by using a tunable laser and an optical spectrum analyzer. Single wavelength reflectance measurements have been carried out to test the sensing performances for ammonia detection in the range 4-20 ppm. High sensitivity to the target analyte and fast response times have been observed. From the results obtained, a Limit Of Detection (LOD) as low as sub-ppm has been achieved.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Pisco, M. Consales, R. Viter, V. Smyntyna, S. Campopiano, M. Giordano, A. Cusano, and Antonello Cutolo "Tin dioxide based optical sensor for in water ppm detection of ammonia at room temperature", Proc. SPIE 5855, 17th International Conference on Optical Fibre Sensors, (23 May 2005); https://doi.org/10.1117/12.623837
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reflectivity

Sensors

Tin

Optical fibers

Optical sensors

Metals

Sensing systems

Back to Top