Paper
19 June 2003 High-power monolithic single-mode diode lasers employing active photonic lattices
Dan Botez
Author Affiliations +
Abstract
Photonic-lattice structures with modulated gain, that is active photonic lattices (APLs), of large index steps and gain preferentially enhanced on the low-index lattice sites have been used, as early as 1988, for effective lateral-mode control range in large-aperture (100-200 microns) high-power coherent devices. Photonic-bandpass (PBP) structures relying on long-range resonant leaky-wave coupling, so called ROW arrays, have allowed stable, near-diffraction-limited beam operation to powers as high as 1.6W CW and 10W peak pulsed. Photonic-bandgap (PBG) structures with a built-in lattice defect, so called ARROW lasers, have provided up to 0.5W peak-pulsed stable, single-mode power and hold the potential for 1W CW reliable single-mode operation from apertures 8-10 microns wide. The solution for high-efficiency surface emission, from 2nd-order DFB/DBR lasers, in an orthonormal, single-lobe beam pattern was found in 2000. Recently, single-lobe and single-mode operation in a diffraction-limited beam orthonormal to the chip surface was demonstrated from 1.5mm-long DFB/DBR ridge-guide lasers. That opens the way for the realization of 2-D surface-emitting,2nd-order APLs for the stable generation of watts of CW single-lobe, single-mode power from large 2-D apertures, as well as scalability of such devices at the wafer level.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dan Botez "High-power monolithic single-mode diode lasers employing active photonic lattices", Proc. SPIE 4993, High-Power Fiber and Semiconductor Lasers, (19 June 2003); https://doi.org/10.1117/12.479510
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

High power lasers

Continuous wave operation

Semiconducting wafers

Control systems

Gallium arsenide

Metals

RELATED CONTENT

Lidar sensors for autonomous driving
Proceedings of SPIE (March 02 2020)
High-power 980-nm laser arrays with nonabsorbing facets
Proceedings of SPIE (October 03 2000)
Recent Advances In High Power Semiconductor Lasers
Proceedings of SPIE (June 22 1989)
High-power high-brightness semiconductor lasers
Proceedings of SPIE (January 31 2005)

Back to Top