Fiber optic probe for in-situ inspection of surface cracks in steam generator tubes

Jose Carlos Lopez Vazquez; Angel F. Doval; Benito Vasquez Dorrio; J. Bugarin; Jose M. Alen; J. L. Fernandez; Mariano Perez-Amor; Benjamin Gonzalez Tejedor

doi:10.1117/12.364290

15 September 1999 Fiber optic probe for in-situ inspection of surface cracks in steam generator tubes

Jose Carlos Lopez Vazquez, Angel F. Doval, Benito Vasquez Dorrio, J. Bugarin, Jose M. Alen, J. L. Fernandez, Mariano Perez-Amor, Benjamin Gonzalez Tejedor

Author Affiliations +

Proceedings Volume 3825, Microsystems Metrology and Inspection; (1999) https://doi.org/10.1117/12.364290
Event: Industrial Lasers and Inspection (EUROPTO Series), 1999, Munich, Germany

Abstract

The automatic inspection of cracks in the inner side of steam generator tubes is routinely carried out using eddy currents techniques. These methods are mature and have quite high performance but the achievable resolution is relatively low (approximately 1 mm) and present drawbacks related to the reliability of the inspection of the areas of tubes at the neighborhood of the supporting plates. Several years ago we have proposed a solution to these limitations based on a new fiberoptic reflectometric technique that has already been theoretically and experimentally analyzed using a first laboratory prototype. In this work we describe a second generation prototype that is integrated in a whole inspection system that could perform an inspection in the field. The results obtained over cylindrical tubes with inner diameter 16.8 mm (corresponding to real steam generator tubes) with cracks created by electrical disintegration and by stress- corrosion and employing conditions close to real operation confirm our previous conclusions: both circumferential and axial cracks of widths as small as 30 micrometer can be detected and measured and typical resolution capability of 10 line pairs/mm can be obtained.

Citation Download Citation

Jose Carlos Lopez Vazquez, Angel F. Doval, Benito Vasquez Dorrio, J. Bugarin, Jose M. Alen, J. L. Fernandez, Mariano Perez-Amor, and Benjamin Gonzalez Tejedor "Fiber optic probe for in-situ inspection of surface cracks in steam generator tubes", Proc. SPIE 3825, Microsystems Metrology and Inspection, (15 September 1999); https://doi.org/10.1117/12.364290

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
10 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Inspection

Prototyping

Image processing

Calibration

Fiber optics

Imaging systems

Optical inspection

Show All Keywords

Keywords/Phrases

Search In:

Publication Years