Paper
24 March 2000 Surface and pulpal temperature comparison of tooth whitening using lasers and curing lights
Joel M. White D.D.S., Jose Pelino, Rively Rodrigues, Brian J. Zwhalen, Max Hoang Nguyen, Emily Wu
Author Affiliations +
Abstract
Chemical action of bleaching agents applied to tooth surface is accelerated by increase in temperature. This in vitro study measured the temperature rises on the surface and in the pulp of teeth during whitening using a diode laser, a plasma arc curing (PAC) light and conventional curing lights. Extracted, non-carious single-rooted teeth were exposed to PAC light and laser at times ranging from 10 to 60 seconds and energy ranges of 2 W, 4 W, and 6 W, and to low-intensity curing lights from 1 to 4 minutes. Maximum temperature rises were analyzed for both pulpal and surface temperature. Diode laser exposures at 2 W for all times and at 4 watts for 10 seconds and PAC light exposures at 10 seconds all produced acceptably safe pulpal rises equivalent to conventional light-curing exposures. Exposures at these settings also attained surface temperature rises that were significantly higher than those using conventional light-curing. The diode laser demonstrated bleaching results equivalent to the PAC light, and both were achieved in significantly less times than conventional light- curing.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joel M. White D.D.S., Jose Pelino, Rively Rodrigues, Brian J. Zwhalen, Max Hoang Nguyen, and Emily Wu "Surface and pulpal temperature comparison of tooth whitening using lasers and curing lights", Proc. SPIE 3910, Lasers in Dentistry VI, (24 March 2000); https://doi.org/10.1117/12.380813
Lens.org Logo
CITATIONS
Cited by 18 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Teeth

Picture Archiving and Communication System

Curium

Semiconductor lasers

Absorbance

Temperature metrology

Diodes

Back to Top