Defect characterization and light scattering by PSL spheres on tungsten CMP wafers

Ping Ding; Greg W. Starr; Rina Chowdhury; E. Dan Hirleman

doi:10.1117/12.284667

2 September 1997 Defect characterization and light scattering by PSL spheres on tungsten CMP wafers

Ping Ding, Greg W. Starr, Rina Chowdhury, E. Dan Hirleman

Proceedings Volume 3215, In-Line Characterization Techniques for Performance and Yield Enhancement in Microelectronic Manufacturing; (1997) https://doi.org/10.1117/12.284667
Event: Microelectronic Manufacturing, 1997, Austin, TX, United States

Abstract

Chemical mechanical polishing (CMP) generates unique difficulties for defect metrology using wafer scanners. Polishing residue, scratches, pits, normal contaminant particles and the pattern covered by the planarized material provide scattering signatures that differ from normal patterned or unpatterned wafers. This relatively young application area for wafer inspection instruments needs a rapid infusion of experience and knowledge infrastructure in order to bring it along to the level of more conventional applications. To that end, a series of relevant experiments have been completed on three types of tungsten (W) CMP test wafers including (1) partially-polished blanket W, (2) fully-polished blanket wafers (polished to oxide), and (3) fully-polished patterned W wafers. Various contamination particles and defects on these wafers were characterized and identified by means of optical microscopy, surface scanning inspection, scanning electron microscopy, energy-dispersive x-ray spectrometry, and atomic force microscopy. A number of defect types including: particles of polished material, substrate, abrasive, oxidizer, and chemical products of polished material and oxidizer; scratches; and pits were expected based on an analysis of the CMP process, and were thereafter confirmed by experiment. Surface roughness was measured on the two types of blanket wafers. W line roughness and dishing depth were measured as a function of line width and pattern density on the patterned W wafers. For light scattering experiments, 0.482 micrometers polystyrene latex spheres were deposited on a patterned W CMP test wafer. Differential light scattering cross sections of particles located in the 0.5 micrometers line/1.0 micrometers pitch region at various locations relative to the W lines were then measured at 488 nm wavelength using the Arizona State University scatterometer.

Citation Download Citation

Ping Ding, Greg W. Starr, Rina Chowdhury, and E. Dan Hirleman "Defect characterization and light scattering by PSL spheres on tungsten CMP wafers", Proc. SPIE 3215, In-Line Characterization Techniques for Performance and Yield Enhancement in Microelectronic Manufacturing, (2 September 1997); https://doi.org/10.1117/12.284667

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available