Fabrication of microrelief surfaces using a one-step lithography process

Klaus Reimer; Ulrich Hofmann; M. Juerss; Wolfgang Pilz; Hans Joachim Quenzer; Bernd Wagner

doi:10.1117/12.284557

2 September 1997 Fabrication of microrelief surfaces using a one-step lithography process

Klaus Reimer, Ulrich Hofmann, M. Juerss, Wolfgang Pilz, Hans Joachim Quenzer, Bernd Wagner

Proceedings Volume 3226, Microelectronic Structures and MEMS for Optical Processing III; (1997) https://doi.org/10.1117/12.284557
Event: Micromachining and Microfabrication, 1997, Austin, TX, United States

Abstract

To fabricate arbitrarily shaped microrelief surfaces you should be able to design and control beside the X- and Y- direction also the Z-direction. With common micromachining technologies this could not be obtained. The surface micro machining technology, with sacrificial layer etching as a key process, is a planar technology, which offers no degree of freedom to design the surface in Z-direction. The bulk micro machining technology, with anisotropic KOH etching of silicon as a key process, offers only restricted possibilities for 3D design. To overcome this limitation binary optical elements have been fabricated using multi-mask processes or multidose e-beam or laser writing. For refractive optical lenses resist melting is a good compromise. This paper reports on a new methodology to fabricate the above discussed arbitrarily shaped structures using a one step lithography process. This technique is called one-level gray-tone lithography, which is common to standard IC manufacturing processes, supplemented by some processes like spincoating and developing of thick resist layer, electroplating of thick metal layers and dry etching. This group of processes has been collected into a new technology category with free design capabilities in Z- direction up to 20 micrometer: relief micro machining. Particular emphasis is put on the design of the halftone transmission masks. The algorithms to transfer an initial height profile into a design representation in the common data format GDSII are discussed. The great data amount of a reticle layout is reduced significantly by a first order data compaction. The specific parameters for the mask making and the resist process are determined. Several components like shaped gratings or lenses are shown in resist up to 15 micrometers thick. In the field of transferring the pattern into a substrate material like silicon or glass, a dry etching process is evaluated.

Citation Download Citation

Klaus Reimer, Ulrich Hofmann, M. Juerss, Wolfgang Pilz, Hans Joachim Quenzer, and Bernd Wagner "Fabrication of microrelief surfaces using a one-step lithography process", Proc. SPIE 3226, Microelectronic Structures and MEMS for Optical Processing III, (2 September 1997); https://doi.org/10.1117/12.284557

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available