Paper
15 March 1998 Resonating large-angle and low-consumption micromachined optical scanner
Sam Calmes, Sandra Schweizer, Philippe Renaud
Author Affiliations +
Abstract
A monolithic silicon integrated optical micro-scanner is presented. The device consists of a mirror located on the tip of a thermal bimorph actuator beam. The fabrication process is very simple and compatible with IC fabrication techniques. The device is excited electrothermomechanically at its resonance frequency, enabling large angular deflections at low power consumption. The technological process consists of basic frontside silicon micromachining steps requiring only three mask levels. The moving part is defined by selective silicon bulk etching. The bimorph beam is made of silicon dioxide and a thin film conductor. The residual stress in the two layers is used to achieve a 45 degree(s) out-of-plane rest position of the mirror. This allows optical components (e.g. laser diode, collimating lens) to be placed directly on the silicon substrate. Mirrors of 500*300 and 1000*500 micrometers 2 with resonant frequencies at 300 and 100 Hz respectively were realized. Mechanical scan angles of above 90 degree(s) were achieved. The devices are very robust and have run through fatigue tests of billions of cycles at 300 Hz and 90 degree(s) deflection. The power consumption of the device is typically 1 mW for 30 degree(s) mechanical scan angles.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sam Calmes, Sandra Schweizer, and Philippe Renaud "Resonating large-angle and low-consumption micromachined optical scanner", Proc. SPIE 3276, Miniaturized Systems with Micro-Optics and Micromechanics III, (15 March 1998); https://doi.org/10.1117/12.302413
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Silicon

Metals

Actuators

Etching

Silicon films

Fabrication

Back to Top