4x4 optoelectronic switch matrix integrating an MSM array with polyimide optical waveguides

Francois L. Gouin; Lucie Robitaille; Claire L. Callender; Julian P. Noad; Carlos Almeida

doi:10.1117/12.298252

22 December 1997 4x4 optoelectronic switch matrix integrating an MSM array with polyimide optical waveguides

Francois L. Gouin, Lucie Robitaille, Claire L. Callender, Julian P. Noad, Carlos Almeida

Proceedings Volume 3290, Optoelectronic Integrated Circuits II; (1997) https://doi.org/10.1117/12.298252
Event: Optoelectronics and High-Power Lasers and Applications, 1998, San Jose, CA, United States

Abstract

Optical fibers offer the wide bandwidth, low losses and low interference required in broadband network applications. Currently, routing the signals to their destination is done by converting the incoming optical signals to an electrical form, carrying out the switching function using electronic circuitry then reconverting to light for the next transmission stage. Recently, we have reported a 3 by 3 optoelectronic switch which combines the functions of conversion and switching. This matrix monolithically integrates metal-semiconductor-metal (MSM) detectors with amplifiers. Very good isolation and crosstalk characterize this switch matrix, but the packaging requires the alignment of nine fibers, the square of the number of inputs, to the various detector crosspoints. In this presentation, we report the fabrication and evaluation of 4 by 4 optoelectronic switching matrices integrating MSM detectors with polyimide waveguides which perform the optical signal distribution on the wafer. These waveguides were fabricated on top of the semiconductor using a photolithographic process. The detector electrodes were formed using a transparent ITO film to maximize the responsivity. The incoming light is distributed using the 'tap' approach, which is more compact than the Y-branching configuration. Two 2 by 4 monolithic arrays were assembled on an alumina circuit using microwave hybrid circuit technology. The bandwidth of the assembled switch exceeds 1 GHz and with improved circuit design, should approach the 5 - 10 GHz bandwidth of the individual MSMs. A similar switch is based on a 4 by 4 monolithic array. The isolation is typically better than 35 dB. These characteristics are compared to the performance of the 3 by 3 OEIC switch and another 4 by 4 switch array assembled using four GaAs MESFET SP4T switches.

Citation Download Citation

Francois L. Gouin, Lucie Robitaille, Claire L. Callender, Julian P. Noad, and Carlos Almeida "4x4 optoelectronic switch matrix integrating an MSM array with polyimide optical waveguides", Proc. SPIE 3290, Optoelectronic Integrated Circuits II, (22 December 1997); https://doi.org/10.1117/12.298252

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available