Paper
1 April 1991 Low-temperature in-situ dry cleaning process for epitaxial layer multiprocessing
Mehrdad M. Moslehi
Author Affiliations +
Proceedings Volume 1393, Rapid Thermal and Related Processing Techniques; (1991) https://doi.org/10.1117/12.48969
Event: Processing Integration, 1990, Santa Clara, CA, United States
Abstract
A low-temperature (600-750C) dry surface cleaning process has been developed for in-situ removal of native oxide layers and other surface contaminants. The cleaning process chemistry consists of a mixture of germane (Ge114) and hydrogen (112) gases with very low germane-tohydrogen flow ratio (10-20 ppm). The process parameters (e. g. temperature pressure and CeH4:H2 gas flow ratio) were adjusted in order to prevent deposition or surface nucleation of germanium during the thermal cleaning process and to minimize the stacking fault densities in the epitaxial silicon layers deposited following the in-situ germane-assisted cleaning steps. The insitu dry surface cleaning processes developed in this work also include associated Ge114/112-based chemistries with a halogen-containing additive gas such as llCl and/or HF. These surface cleaning processes can be easily integrated with various thin film growth and deposition processes such as epitaxial growth gate dielectric formation and polycrystalline or amorphous silicon deposition for MOS and bipolar device fabrication.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mehrdad M. Moslehi "Low-temperature in-situ dry cleaning process for epitaxial layer multiprocessing", Proc. SPIE 1393, Rapid Thermal and Related Processing Techniques, (1 April 1991); https://doi.org/10.1117/12.48969
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Oxides

Silicon

Hydrogen

Plasma

Etching

Semiconductors

Germanium

Back to Top