Paper
21 December 1998 Requirements for calibration of focal plane arrays for imaging spectrometers
Author Affiliations +
Abstract
Recently a new class of instruments, that uses a detector array to measure spectra for multiple points on the ground, has become available. These instruments build up an image by a pushbroom technique. The realization of the maximum potential of these Array Imaging Spectrometers is dependent on the ability to correct pixel to pixel variations in gain, bias, dark current and linearity of the detector array. Residual calibration striping in each band along the temporal axis, is usually the limiting noise source in these sensors, not photon or system electronic noise. Indeed, performance calculations or measurements which do not take this important noise source into account seriously overestimate the performance of Array Imaging Spectrometers. In this paper, the calibration requirements for Array Imaging Spectrometers, in general, and the procedure used to calibrate the Airborne Hyperspectral Imager (AHI) will be discussed. Examples from the Airborne-Hyperspectral Imager (AHI) will be used to illustrate the residual error and characterize its effect.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Paul G. Lucey and Edwin M. Winter "Requirements for calibration of focal plane arrays for imaging spectrometers", Proc. SPIE 3498, Sensors, Systems, and Next-Generation Satellites II, (21 December 1998); https://doi.org/10.1117/12.333644
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

Sensors

Imaging arrays

Spectrometers

Black bodies

Imaging systems

Detector arrays

Back to Top