Line-edge roughness performance targets for EUV lithography

Timothy A. Brunner; Xuemei Chen; Allen Gabor; Craig Higgins; Lei Sun; Chris A. Mack

doi:10.1117/12.2258660

24 March 2017 Line-edge roughness performance targets for EUV lithography

Timothy A. Brunner, Xuemei Chen, Allen Gabor, Craig Higgins, Lei Sun, Chris A. Mack

Proceedings Volume 10143, Extreme Ultraviolet (EUV) Lithography VIII; 101430E (2017) https://doi.org/10.1117/12.2258660
Event: SPIE Advanced Lithography, 2017, San Jose, California, United States

Abstract

Our paper will use stochastic simulations to explore how EUV pattern roughness can cause device failure through rare events, so-called "black swans". We examine the impact of stochastic noise on the yield of simple wiring patterns with 36nm pitch, corresponding to 7nm node logic, using a local Critical Dimension (CD)-based fail criteria Contact hole failures are examined in a similar way. For our nominal EUV process, local CD uniformity variation and local Pattern Placement Error variation was observed, but no pattern failures were seen in the modest (few thousand) number of features simulated. We degraded the image quality by incorporating Moving Standard Deviation (MSD) blurring to degrade the Image Log-Slope (ILS), and were able to find conditions where pattern failures were observed. We determined the Line Width Roughness (LWR) value as a function of the ILS. By use of an artificial "step function" image degraded by various MSD blur, we were able to extend the LWR vs ILS curve into regimes that might be available for future EUV imagery. As we decreased the image quality, we observed LWR grow and also began to see pattern failures. For high image quality, we saw CD distributions that were symmetrical and close to Gaussian in shape. Lower image quality caused CD distributions that were asymmetric, with "fat tails" on the low CD side (under-exposed) which were associated with pattern failures. Similar non-Gaussian CD distributions were associated with image conditions that caused missing contact holes, i.e. CD=0.

Conference Presentation

Citation Download Citation

Timothy A. Brunner, Xuemei Chen, Allen Gabor, Craig Higgins, Lei Sun, and Chris A. Mack "Line-edge roughness performance targets for EUV lithography", Proc. SPIE 10143, Extreme Ultraviolet (EUV) Lithography VIII, 101430E (24 March 2017); https://doi.org/10.1117/12.2258660

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available