Volume Table of Contents

PROCEEDINGS VOLUME 9684

EIGHTH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGY (AOMATT2016) | 26-29 APRIL 2016

8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment

Editor(s): Yudong Zhang, Fan Wu, Ming Xu, Sandy To

Editor Affiliations +

IN THIS VOLUME

3 Sessions, 148 Papers, 0 Presentations

Front Matter: Volume 9684 (1)

Oral Session (28)

Poster Session (119)

EIGHTH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGY (AOMATT2016)

26-29 April 2016

Suzhou, China

View the SPIE Conference + Exhibitions Calendar

Subscribe to Digital Library

VIEW ALL ABSTRACTS +

Front Matter: Volume 9684

Front Matter: Volume 9684 Open Access

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968401 (2016) https://doi.org/10.1117/12.2256682

Read Abstract +

Oral Session

Mount-induced transmitted wavefront distortion measurement of large slab matrix module Paper

Haixian Ye, Tingfen Cao, Changchun Liu, Zhao Xiong, Haiping Chen

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968402 (2016) https://doi.org/10.1117/12.2241504

Read Abstract +

Research on the photoelectric measuring method of warhead fragment velocity Paper

Ji Liu, Lixia Yu, Bin Zhang, Xiaoyan Liu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968403 (2016) https://doi.org/10.1117/12.2242701

Read Abstract +

The influence of relative humidity on the scattered light signal of aerosol concentration measurement system Paper

Fang Gu, Jiahong Zhang, Yunyun Chen, Fengpin Cui, Yi Liu, Yuanyuan Wei, Lei Shen

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968404 (2016) https://doi.org/10.1117/12.2243535

Read Abstract +

Physical properties, such as density, refractive index and morphology of the aerosol particles will be changed when the relative humidity of the environment is relatively high, which leads to a significant variation of the scattered light signal collected by the single particle light scattering measurement system. If the calibration parameters in the condition of low humidity are applied to inverse aerosol mass concentration, the measurement accuracy will certainly be degraded. Therefore, the calibration parameters of the system must be corrected. In this case, the monotonic relationship between the particle size and the scattered light signal collected by the system should be considered carefully. Combining the Mie scattering theory with the humidity growth model of the particle size and the refractive index, the influence of relative humidity on the scattered light signals of spherical particles has been investigated in this paper. The results indicate that the diameters of spherical particles grow exponentially and the refractive index decreases linearly when the relative humidity is increased between 60% and 95%. Consequently, a significant change of the angular distribution of the scattering intensity occurs. The forward-scattered light is getting stronger, while the back-scattered light becomes weaker. Meanwhile, the scattered light flux of the particle within a solid angle displays exponential growth with increasing the relative humidity. Thus, the monotonous relationship between the particle size and the scattered light flux has changed significantly in the case of the high humidity, and their quadratic coefficient decreases clearly assuming the particle density invariant, which causes an obvious increase of the calibrated proportional coefficient. The results of this work provide an important theoretical guidance for the humidity correction of calibration parameters for the inversion of aerosol mass concentration by the single particle light scattering method.

Near infrared reflective shearing point diffraction interferometer for dynamic wavefront measurement Paper

Wenhua Zhu, Lei Chen, Donghui Zheng

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968405 (2016) https://doi.org/10.1117/12.2240632

Read Abstract +

Research on adjusting and testing of off-axis paraboloid mirror with large aperture Paper

Donghui Zheng, Lei Chen, Wenhua Zhu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968406 (2016) https://doi.org/10.1117/12.2240476

Read Abstract +

High precision calibration of line structured light sensors based on linear transformation over triangular domain Paper

Yuehua Li, Jingbo Zhou, Fengshan Huang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968407 (2016) https://doi.org/10.1117/12.2242945

Read Abstract +

Annular sub-aperture stitching interferometry testing for large-caliber aspheric Paper

Pengfei Wu, Shuming Yang, Lin Sun, Pu Zhao, Zhuangde Jiang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968408 (2016) https://doi.org/10.1117/12.2241523

Read Abstract +

Synchronous two-wavelength temporal interferometry Paper

Xiaoqiong Zhang, Zhan Gao, Jie Qin, Guangyu Li, Ziang Feng, Shengjia Wang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968409 (2016) https://doi.org/10.1117/12.2239472

Read Abstract +

Design of a photoelectron/ion imaging spectrometer with high temporal resolution Paper

Yuzhu Liu, Yue Guan, Kuang Ao, Shixin Pei, Fang Gu, Jing Su, Linhua Xu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840A (2016) https://doi.org/10.1117/12.2243431

Read Abstract +

Manufacture, alignment and measurement for a reflective triplet optics in imaging spectrometer Paper

Liyin Yuan, Zhiping He, Yueming Wang, Gang Lv

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840B (2016) https://doi.org/10.1117/12.2246278

Read Abstract +

Sub-aperture stitching test of a cylindrical mirror with large aperture Paper

Shuai Xue, Shanyong Chen, Feng Shi, Jinfeng Lu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840C (2016) https://doi.org/10.1117/12.2242861

Read Abstract +

A novel way of squareness measurement on ultra-precision motion stage basing on the error separation Paper

Tao Lai, Xiaoqiang Peng, Guipeng Tie, Junfeng Liu, Meng Guo

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840D (2016) https://doi.org/10.1117/12.2243406

Read Abstract +

Stochastic dual-plane on-axis digital holography based on Mach–Zehnder interferometer Paper

Fengpeng Wang, Dayong Wang, Lu Rong, Yunxin Wang, Jie Zhao

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840E (2016) https://doi.org/10.1117/12.2245141

Read Abstract +

Design of a compound eye system with planar micolens array and curved folded mirrors Paper

Mengchao Ma, Xicheng Gao, Jin Zhang, Huaxia Deng

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840F (2016) https://doi.org/10.1117/12.2244002

Read Abstract +

Mounting of reference surface for a transmission sphere Paper

Wei-Jei Peng, Cheng-Fang Ho, Zong-Ru Yu, Chien-Yao Huang, Ching-Hsiang Kuo, Wei-Yao Hsu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840G (2016) https://doi.org/10.1117/12.2242360

Read Abstract +

Sub-nanometer asphere fabrication and testing Paper

Erlong Miao, Songtao Gao, Jian Zhang, Dongqi Su

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840H (2016) https://doi.org/10.1117/12.2245724

Read Abstract +

3D shape reconstruction of rail and surface defect detection based on PMP Paper

Fan Duan, Jinlong Lee, Lin Luo, Xiaorong Gao

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840I (2016) https://doi.org/10.1117/12.2245550

Read Abstract +

Phase measurement profilometry based on a virtual reference plane method Paper

Hongbing Ren, Jinlong Lee, Xiaorong Gao

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840J (2016) https://doi.org/10.1117/12.2245564

Read Abstract +

Rapid matching of stereo vision based on fringe projection profilometry Paper

Ruihua Zhang, Yi Xiao, Jian Cao, Hongwei Guo

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840K (2016) https://doi.org/10.1117/12.2243803

Read Abstract +

Gaussian process based intelligent sampling for measuring nano-structure surfaces Paper

L. J. Sun, M. J. Ren, Y. H. Yin

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840L (2016) https://doi.org/10.1117/12.2241769

Read Abstract +

A review of relationship between optical performance and geometrical errors of freeform optics Paper

Panyu Zhou, Lingbao Kong, Min Xu, Jing Li

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840M (2016) https://doi.org/10.1117/12.2245551

Read Abstract +

Monitoring PMD in two-dimensional phase diagram for NRZ-DPSK systems using 0.25 bit period delay-tap sampling technique Paper

Xichan Zhang, Yunfeng Peng, Yumin Liu, Tonghui Ji

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840N (2016) https://doi.org/10.1117/12.2239774

Read Abstract +

Study on the metrological performance of self-calibration angle encoder Paper

Yao Huang, Zi Xue, Dan Qiao, Yan Wang, Chunran Yue, Guixin Liu, Zhichao Wang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840O (2016) https://doi.org/10.1117/12.2246004

Read Abstract +

An improved self-calibration algorithm for multilateration coordinates measuring system Paper

Dongjing Miao, Guolei Wang, Jianshuan Li, Mingzhao He, Yao Kang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840P (2016) https://doi.org/10.1117/12.2243433

Read Abstract +

High resolution aspheric surface measurement technology based on laser interferometer Paper

Xiaofei Diao, Zi Xue, Yanhui Kang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840Q (2016) https://doi.org/10.1117/12.2244155

Read Abstract +

Distributed pavement subgrade shape monitoring based on FBG sensing technique Paper

Zhiguo Chen, Boshi Wang, Wanqiu Liu, Zhigang Wei

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840R (2016) https://doi.org/10.1117/12.2242170

Read Abstract +

Study on high-precision measurement of long radius of curvature Paper

Dongcheng Wu, Shijun Peng, Songtao Gao

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840S (2016) https://doi.org/10.1117/12.2245381

Read Abstract +

Ultra-high accuracy point diffraction interferometer: development, acccuracy evaluation and application Paper

Jie Yu, Haitao Zhang, Chunshui Jin, Dongmei Ma, Hui Wang, Zengxiong Lu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840T (2016) https://doi.org/10.1117/12.2246269

Read Abstract +

Poster Session

Dynamics of spiral patterns in gas discharge detected by optical method Paper

Fan Yang, Mingyi Wang, Shuhua Liu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840U (2016) https://doi.org/10.1117/12.2240251

Read Abstract +

Research on testing system for optical surface based on polarizing coherent technology Paper

De-wei Huang, Min Wang, Fen Wang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840V (2016) https://doi.org/10.1117/12.2240552

Read Abstract +

A phase retrieval algorithm based on color-frequency encoding for fringe reflection technique Paper

Suodong Ma, Bo Li

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840W (2016) https://doi.org/10.1117/12.2242699

Read Abstract +

Spectrum synthesis for a spectrally tunable light source based on a DMD-convex grating Offner configuration Paper

Suodong Ma, Qiao Pan, Weimin Shen

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840X (2016) https://doi.org/10.1117/12.2242703

Read Abstract +

Test technology on divergence angle of laser range finder based on CCD imaging fusion Paper

Sheng-bing Shi, Zhen-xing Chen, Yao Lv

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840Y (2016) https://doi.org/10.1117/12.2242998

Read Abstract +

Test method on infrared system range based on space compression Paper

Zhen-xing Chen, Sheng-bing Shi, Fu-li Han

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96840Z (2016) https://doi.org/10.1117/12.2243444

Read Abstract +

Test technology on CCD anti-sunlight jamming based on complex circumstance Paper

Sheng-bing Shi, Zhen-xing Chen, Fu-li Han

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968410 (2016) https://doi.org/10.1117/12.2243445

Read Abstract +

Longitudinal electron bunch diagnostics using coherent transition radiation at the IRFEL Paper

T. Y. Zhou, Y. L. Yang, B. G. Sun, L. L. Tang, P. Lu, Z. R. Zhou, F. F. Wu, X. Y. Liu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968411 (2016) https://doi.org/10.1117/12.2240748

Read Abstract +

Calibration of transition matrix of coordinate system for the aurora imager Paper

Quanfeng Guo, Fei He, Yang Liu, Yusheng Qin, Xu Li

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968412 (2016) https://doi.org/10.1117/12.2242816

Read Abstract +

Optimal visual simulation of the self-tracking combustion of the infrared decoy based on the particle system Paper

Qi Hu, Jin Duan, LiNing Wang, Di Zhai

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968413 (2016) https://doi.org/10.1117/12.2242559

Read Abstract +

Design of near-infrared single photon detector at 1550nm wavelength Paper

Jiali Gao

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968414 (2016) https://doi.org/10.1117/12.2244003

Read Abstract +

Experimental research of improved subaperture stitching method able to eliminate high-order defocus error Paper

Quan Zheng, Lei Chen, Le Song, Zhigang Han

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968415 (2016) https://doi.org/10.1117/12.2241147

Read Abstract +

Design of an ultraviolet fluorescence lidar for biological aerosol detection Paper

Zhimin Rao, Dengxin Hua, Tingyao He, Jing Le

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968416 (2016) https://doi.org/10.1117/12.2240168

Read Abstract +

Dual-wavelength retinal image registration based on vessel segmentation and optic disc detection Paper

Yong-li Xian, Yun Dai, Chun-ming Gao, Rui Du

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968417 (2016) https://doi.org/10.1117/12.2243587

Read Abstract +

Research of errors and fabrication method for cylindrical hologram phase grating as standard in interferometric stylus profiler Paper

Hang Zha, Xinrong Chen, Chaoming Li, Xiaoyang Li, Jian Yu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968418 (2016) https://doi.org/10.1117/12.2243438

Read Abstract +

Improved coded exposure for enhancing imaging quality and detection accuracy of moving targets Paper

Baoqi Mao, Li Chen, Lin Han, Weimin Shen

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968419 (2016) https://doi.org/10.1117/12.2241613

Read Abstract +

Three-dimensional profile reconstruction based on infrared multi-view vision Paper

Shuqi Zhao, Zhimin Zhang, Xiong Wan

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841A (2016) https://doi.org/10.1117/12.2240265

Read Abstract +

Research on measurement of center thickness of the lens with a hole Paper

Linchao Zhang, Xiaoming Wu, Haozhao Li, Hongxiao Sun

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841B (2016) https://doi.org/10.1117/12.2242285

Read Abstract +

Research on effects of baffle position in an integrating sphere on the luminous flux measurement Paper

Fangsheng Lin, Tiecheng Li, Dejin Yin, Lei Lai, Ming Xia

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841C (2016) https://doi.org/10.1117/12.2245572

Read Abstract +

A robust color image fusion for low light level and infrared images Paper

Chao Liu, Xiao-hui Zhang, Qing-ping Hu, Yong-kang Chen

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841D (2016) https://doi.org/10.1117/12.2243116

Read Abstract +

The influence of low light level ICCD image on low light level and infrared image fusion Paper

Qing-ping Hu, Xiao-hui Zhang, Chao Liu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841E (2016) https://doi.org/10.1117/12.2243010

Read Abstract +

Online evaluation system for the photo-physical properties of organic photoelectric materials and device integrated with the device fabrication instrument Paper

Hongyan Zhang, Lingqiang Meng, Weimin Liu, Pengfei Wang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841F (2016) https://doi.org/10.1117/12.2242886

Read Abstract +

Alignment and measurement for back-end optical system of quantum communication Paper

Qi-rui Xu, Bin Fan

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841G (2016) https://doi.org/10.1117/12.2242142

Read Abstract +

Performance test and image correction of CMOS image sensor in radiation environment Paper

Congzheng Wang, Song Hu, Chunming Gao, Chang Feng

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841H (2016) https://doi.org/10.1117/12.2243427

Read Abstract +

The analysis of measurement accuracy of the parallel binocular stereo vision system Paper

Huan Yu, Tingwen Xing, Xin Jia

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841I (2016) https://doi.org/10.1117/12.2243156

Read Abstract +

Fresnel incoherent correlation holography and its imaging properties Paper

Zhipeng Wang, Haotong Ma, Ge Ren, Zongliang Xie, Huan Yu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841J (2016) https://doi.org/10.1117/12.2243137

Read Abstract +

A new multi-probe scanning method for measuring optical surface Paper

Dede Zhai, Ziqiang Yin, Shanyong Chen, Fujing Tian

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841K (2016) https://doi.org/10.1117/12.2243800

Read Abstract +

Different environmental conditions from the effects of repetitive fixed focus lens of long focal distance Paper

Yuan Quan, Lin Zhang, Huan Ren, Yi Yang, Zhen-dong Shi, Hua Ma, Ke Ma, Yu-rong Ma, Xiao-xuan Feng

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841L (2016) https://doi.org/10.1117/12.2245567

Read Abstract +

Accuracy decline of the Brillouin optical time-domain analysis system induced by self-phase modulation Paper

Yuqing Zhou, Wei Chen, Zhou Meng

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841M (2016) https://doi.org/10.1117/12.2243864

Read Abstract +

Research on auto-centering device in surface defects evaluation system of large spherical optics Paper

Yihui Zhang, Yongying Yang, Fan Wu, Huiting Chai, Kai Yan, Lin Zhou, Yang Li, Dong Liu, Jian Bai, et al.

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841N (2016) https://doi.org/10.1117/12.2243299

Read Abstract +

Design on electromagnetic actuator of aerostatic bearing stylus displacement sensor Paper

Junwei Wang, Suping Chang, Xiaojun Liu, Wenlong Lu, Yanling Sun, Chunbing Hu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841O (2016) https://doi.org/10.1117/12.2243138

Read Abstract +

A method based on reflection theory to test the attenuation performance of an absorption coat to 8mm waves Paper

Xuanyu Wang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841P (2016) https://doi.org/10.1117/12.2242774

Read Abstract +

A cylinder based calibration method for integrating a line structured light sensor with a rotation-translation platform Paper

Jingbo Zhou, Yuehua Li, Lijian Liu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841Q (2016) https://doi.org/10.1117/12.2242943

Read Abstract +

Three-dimensional measurement of multilayer thin films based on scanning white light interferometer Paper

Zhendong Shi, Lin Zhang, Huan Ren, Quan Yuan, Yi Yang, Hua Ma

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841R (2016) https://doi.org/10.1117/12.2244511

Read Abstract +

Analysis and modeling of atmospheric turbulence on the high-resolution space optical systems Paper

Jiang Lili, Xiaomei Chen, Guoqiang Ni

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841S (2016) https://doi.org/10.1117/12.2243593

Read Abstract +

Research on manufacturing method of CGH Paper

Xueting Duan

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841T (2016) https://doi.org/10.1117/12.2244164

Read Abstract +

A new method of head attitude tracking based on CCD/MIMU Paper

Kai Ma, Quanxin Ding, Qiuzhi Zhang, Jianghua Wang, Yongsheng Wang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841U (2016) https://doi.org/10.1117/12.2242777

Read Abstract +

A testing method of optical axes parallelism of shipboard photoelectrical theodolite Paper

Hui-hui Zou, Hong-bing Wu, Lu-jun Zhou

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841V (2016) https://doi.org/10.1117/12.2240267

Read Abstract +

Detection for flatness of large surface based on structured light Paper

Wenyan He, Xuedong Cao, Kuang Long, Zhang Peng

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841W (2016) https://doi.org/10.1117/12.2243409

Read Abstract +

Study on paper's basis weight measurement method by double monochromatic light sources Paper

Changtao Mo, Guangming Wang, Shuai Huan, Jingji Wen, Zhidan Xu, Hailin Su, Lili Zhang, Jia Lv, Ming Wang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841X (2016) https://doi.org/10.1117/12.2242252

Read Abstract +

Specular gloss scales comparison between the SIMT and the NIST Paper

Dejin Yin, Tiecheng Li, Biyong Huang, Weihai Cheng, Fangsheng Lin

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841Y (2016) https://doi.org/10.1117/12.2245745

Read Abstract +

Application of image stitching in rail abrasion 3D online detection Paper

Jinlong Lee, Xiaorong Gao, Zeyong Wang, Quanke Zhao, Lin Luo

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96841Z (2016) https://doi.org/10.1117/12.2245679

Read Abstract +

Defect detection for end surface of ferrite magnetic tile Paper

Jiayuan Tao, Yuwei Wang, Keyi Wang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968420 (2016) https://doi.org/10.1117/12.2241044

Read Abstract +

The estimation method on diffusion spot energy concentration of the detection system Paper

Wei Gao, Zongxi Song, Feng Liu, Lijun Dan, Zhonghan Sun, Yunfei Du

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968421 (2016) https://doi.org/10.1117/12.2242811

Read Abstract +

Influencing factors and error analysis for specular gloss measurement Paper

Tiecheng Li, Leibing Shi, Lei Lai, Fangsheng Lin, Dejin Yin, Ming Xia, Limin Wu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968422 (2016) https://doi.org/10.1117/12.2245804

Read Abstract +

Evaluating system for SRAM-based FPGA single event upset rate Paper

Yunlong Wang, Bin Bao

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968423 (2016) https://doi.org/10.1117/12.2243428

Read Abstract +

The method to reduce the spinal error in the aspheric mirror testing with the CGH Paper

Fengtao Yan, Bin Fan, Xi Hou, Fan Wu, Baiping Lei, Haitao Liu, Hongshen Zhao

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968424 (2016) https://doi.org/10.1117/12.2243805

Read Abstract +

Research on measurement of total luminous flux of single LED in direct comparison method Paper

Biyong Huang, Lei Lai, Dejin Yin, Weihai Cheng, Fangsheng Lin

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968425 (2016) https://doi.org/10.1117/12.2245703

Read Abstract +

A novel long-wave infrared high resolution continuous zoom lens with uncooled thermal detector Paper

Jiaqi Bao, Kan Yu, Zijuan Ji

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968426 (2016) https://doi.org/10.1117/12.2240712

Read Abstract +

A fast algorithm for image defogging Paper

Xingyu Wang, Shuai Guo, Hui Wang, Haibing Su

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968427 (2016) https://doi.org/10.1117/12.2243461

Read Abstract +

Measurement of deformation and frequency response characteristic of PZT tube in tunable fiber laser with short period based on coherent laser beam Paper

Zhi Lai, Xiaodong Zeng, Zhaojin Fan, Zhichen Xu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968428 (2016) https://doi.org/10.1117/12.2242567

Read Abstract +

Consistency check method for sighting axis and laser detection axis based on field testing Paper

Hao Guo, Linfeng Zhao, Yanfang Liu, Ruiguang Yin

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968429 (2016) https://doi.org/10.1117/12.2242250

Read Abstract +

Color hologram reconstruction based on single DMD Paper

Jiang Xing, Hao Zhou, Dan Wu, Jun-jian Hou, Ji-hua Gu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842A (2016) https://doi.org/10.1117/12.2240636

Read Abstract +

General model for the pointing error analysis of Risley-prism system based on ray direction deviation in light refraction Paper

Hao Zhang, Yan Yuan, Lijuan Su, Fengzhen Huang, Qing Bai

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842B (2016) https://doi.org/10.1117/12.2241155

Read Abstract +

Computer-generated holograms for precision optical testing Paper

Xiaohong Wei, Yuhang He, Kaiyuan Xu, Bo Gao, Qiang Li, Liqun Chai

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842C (2016) https://doi.org/10.1117/12.2243164

Read Abstract +

Adaboost multi-view face detection based on YCgCr skin color model Paper

Qi Lan, Zhiyong Xu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842D (2016) https://doi.org/10.1117/12.2243232

Read Abstract +

Application research of the balance detector on coherent detection techniques Paper

Gaixia Wang, Yongmei Huang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842E (2016) https://doi.org/10.1117/12.2243573

Read Abstract +

A standard test method based on point spread function for three-dimensional imaging system Paper

Tao Wen, Jinxin Dong, Zhixiong Hu, Zhenggang Cao, Wenli Liu, Jianlin Wang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842F (2016) https://doi.org/10.1117/12.2243260

Read Abstract +

Development of glucose measurement system based on pulsed laser-induced ultrasonic method Paper

Zhong Ren, Bin Wan, Guodong Liu, Zhihua Xiong

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842G (2016) https://doi.org/10.1117/12.2241490

Read Abstract +

Performance evaluation and verification of infrared imaging system based on TTP metric Paper

Na Ma, Qiong Gao, Zhendong Ding, Yanxiu Zhang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842H (2016) https://doi.org/10.1117/12.2242493

Read Abstract +

Research on testing method for combined aspheric surface with non-rotational symmetric Paper

Wencai Zhou, Feng Xu, Xiaoxiao Wei

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842I (2016) https://doi.org/10.1117/12.2242864

Read Abstract +

Design and fabrication of CGH for 600mm diameter SiC primary mirror surface figure testing Paper

Zhihai Pang, Zhen Ma, Xuewu Fan, Gangyi Zou

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842J (2016) https://doi.org/10.1117/12.2243443

Read Abstract +

A new method for COD analysis with full-spectrum based on Artificial Neural Network Paper

Wei-wei Feng, Dan Li, Zong-qi Cai, Fu-guo Hao

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842K (2016) https://doi.org/10.1117/12.2242629

Read Abstract +

Generation of parallel transmission sub-pulses of spatial distribution based on polarizing splitting prism Paper

Haifeng Yang, Xiaoping Yang, Xuna Sun, Jun Liu, Yong Yang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842L (2016) https://doi.org/10.1117/12.2241612

Read Abstract +

Evaluating surface repeatability for interferometric measurement: a comparative study Paper

Haiyang Quan, Hou Xi, Fan Wu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842M (2016) https://doi.org/10.1117/12.2243301

Read Abstract +

New reconstruction algorithm for absolute shape calibration in two-flat test Paper

Yuhang He, Qiang Li, Daoming Wan, Liqun Chai

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842N (2016) https://doi.org/10.1117/12.2242722

Read Abstract +

Object tracking algorithm based on contextual visual saliency Paper

Bao Fu, XianRong Peng

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842O (2016) https://doi.org/10.1117/12.2243216

Read Abstract +

Object detection based on deformable part model Paper

Lei Wei, Zhiyong Xu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842P (2016) https://doi.org/10.1117/12.2243219

Read Abstract +

Studies on spectral scene reproduction systems based on multispectral LED fitting Paper

Xinzhuo Lei, Wang Zhou, Lei Wang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842Q (2016) https://doi.org/10.1117/12.2242714

Read Abstract +

Method used to test the imaging consistency of binocular camera's left-right optical system Paper

Meiying Liu, Hu Wang, Jie Liu, Yaoke Xue, Shaodong Yang, Hui Zhao

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842R (2016) https://doi.org/10.1117/12.2242265

Read Abstract +

Development of high power UV irradiance meter calibration device Paper

Ming Xia, Jianqiang Gao, Dejin Yin, Tiecheng Li

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842S (2016) https://doi.org/10.1117/12.2245741

Read Abstract +

Design of measuring system for wire diameter based on sub-pixel edge detection algorithm Paper

Yudong Chen, Wang Zhou

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842T (2016) https://doi.org/10.1117/12.2243166

Read Abstract +

Measurement of z-axis deviation angle of electro-optic crystal by conoscopic interference Paper

Dong Li, Yong Liu, Xu Liu, Hongzhen Jiang, Fanglan Zheng

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842U (2016) https://doi.org/10.1117/12.2242155

Read Abstract +

Stray light measurement for point source transmittance of space optical systems Paper

Qinfang Chen, Zhen Ma, Xinyao Li, Zhihai Pang, Liang Xu, Zhaohui Li

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842V (2016) https://doi.org/10.1117/12.2243405

Read Abstract +

Simulation study on simultaneous phase-shifting lateral-shearing interferometer Paper

XuHua Wu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842W (2016) https://doi.org/10.1117/12.2243408

Read Abstract +

Axis consistency testing method based on image processing technology for non-cooperative target Paper

Xin Li, Yong Zhang, Dongxi Ma

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842X (2016) https://doi.org/10.1117/12.2243251

Read Abstract +

Study and analysis of catadioptric null compensating test Paper

Long Zhang, Wenqi Hu, Liehua Zheng, Peiming Hao

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842Y (2016) https://doi.org/10.1117/12.2242492

Read Abstract +

Development and experiments of lateral shearing interferometer for parabolic surface measurement Paper

Bingcai Liu, Hongjun Wang, Ailing Tian

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96842Z (2016) https://doi.org/10.1117/12.2242368

Read Abstract +

Research of maneuvering target prediction and tracking technology based on IMM algorithm Paper

Zheng Cao, Yao Mao, Chao Deng, Qiong Liu, Jing Chen

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968430 (2016) https://doi.org/10.1117/12.2243242

Read Abstract +

Maneuvering target prediction and tracking technology is widely used in both military and civilian applications, the study of those technologies is all along the hotspot and difficulty. In the Electro-Optical acquisition-tracking-pointing system (ATP), the primary traditional maneuvering targets are ballistic target, large aircraft and other big targets. Those targets have the features of fast velocity and a strong regular trajectory and Kalman Filtering and polynomial fitting have good effects when they are used to track those targets. In recent years, the small unmanned aerial vehicles developed rapidly for they are small, nimble and simple operation. The small unmanned aerial vehicles have strong maneuverability in the observation system of ATP although they are close-in, slow and small targets. Moreover, those vehicles are under the manual operation, therefore, the acceleration of them changes greatly and they move erratically. So the prediction and tracking precision is low when traditional algorithms are used to track the maneuvering fly of those targets, such as speeding up, turning, climbing and so on. The interacting multiple model algorithm (IMM) use multiple models to match target real movement trajectory, there are interactions between each model. The IMM algorithm can switch model based on a Markov chain to adapt to the change of target movement trajectory, so it is suitable to solve the prediction and tracking problems of the small unmanned aerial vehicles because of the better adaptability of irregular movement. This paper has set up model set of constant velocity model (CV), constant acceleration model (CA), constant turning model (CT) and current statistical model. And the results of simulating and analyzing the real movement trajectory data of the small unmanned aerial vehicles show that the prediction and tracking technology based on the interacting multiple model algorithm can get relatively lower tracking error and improve tracking precision comparing with traditional algorithms.

A surface irregularity compensation alignment method for all-reflective optical system Paper

Lian Li, Ming Zhang, TianMeng Ma

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968431 (2016) https://doi.org/10.1117/12.2244939

Read Abstract +

Online damage inspection of optics for ATP system Paper

Jing Chen, Yu Jiang, Yao Mao, Xun Gan, Qiong Liu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968432 (2016) https://doi.org/10.1117/12.2243287

Read Abstract +

A visual tracking method based on improved online multiple instance learning Paper

Xianhui He, Yuxing Wei

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968433 (2016) https://doi.org/10.1117/12.2243218

Read Abstract +

Defects detection for rough magnetic tiles surface based on light sectioning Paper

Yuwei Wang, Jiayuan Tao, Xiangcheng Chen, Keyi Wang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968434 (2016) https://doi.org/10.1117/12.2242700

Read Abstract +

A new measurement method for color discrimination thresholds of human eyes based on PWM light-mixing technology Paper

Jiyan Zhang, Jinxin Dong

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968435 (2016) https://doi.org/10.1117/12.2243271

Read Abstract +

Compact optical system for cesium atomic fountain clock Paper

Jiang Chen, Jun Ruan, Junru Shi, Fengxiang Yu, Hui Zhang, Xinliang Wang, Shougang Zhang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968436 (2016) https://doi.org/10.1117/12.2242698

Read Abstract +

Fizeau simultaneous phase-shifting interferometry based on extended source Paper

Shanshan Wang, Qiudong Zhu, Yinlong Hou, Zheng Cao

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968437 (2016) https://doi.org/10.1117/12.2256227

Read Abstract +

Analysis of absolute flatness testing in sub-stitching interferometer Paper

Xin Jia, Fuchao Xu, Weimin Xie, Tingwen Xing

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968438 (2016) https://doi.org/10.1117/12.2243462

Read Abstract +

A review of RGB-LED based mixed-color illumination system for machine vision and microscopy Paper

Lexin Hou, Hexin Wang, Min Xu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968439 (2016) https://doi.org/10.1117/12.2242979

Read Abstract +

Surface roughness measurement with laser triangulation Paper

Fuzhong Bai, Xiaoyan Zhang, Chaoping Tian

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843A (2016) https://doi.org/10.1117/12.2242969

Read Abstract +

Experimental study of resonance fiber optic gyroscope employing a dual-ring resonator Paper

Yue Fan, Wei Wang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843B (2016) https://doi.org/10.1117/12.2243252

Read Abstract +

The effect analysis of conic coefficient error based on data measured from Talysurf and simulation of Zernike coefficients Paper

Jiang Kai, Kai Liu, Chong Song, Qiu Peng, Wang Peng, Gang Li

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843C (2016) https://doi.org/10.1117/12.2242968

Read Abstract +

Research of mine water source identification based on LIF technology Paper

Mengran Zhou, Pengcheng Yan

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843D (2016) https://doi.org/10.1117/12.2240103

Read Abstract +

The application of tapered multi-mode fiber in laser signal simulation Paper

Ruiguang Yin, Hao Guo, Weiwei Liang, Wenpan Zhang, Hui Li

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843E (2016) https://doi.org/10.1117/12.2242955

Read Abstract +

Design of short-range terahertz wave passive detecting system Paper

Chao Zhang, Guowei Lou, Li Zhu, Songsong Qian, Ting Li

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843F (2016) https://doi.org/10.1117/12.2243619

Read Abstract +

Non-null compensator design method in digital Moiré interferometry for freeform surface measurement Paper

Qun Hao, Shaopu Wang, Yao Hu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843G (2016) https://doi.org/10.1117/12.2245286

Read Abstract +

The aberration characteristics in a misaligned three-mirror anastigmatic (TMA) system Paper

Bin Wang, Fan Wu, Yutang Ye

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843H (2016) https://doi.org/10.1117/12.2245372

Read Abstract +

An adaptive block-based fusion method with LUE-SSIM for multi-focus images Paper

Jianing Zheng, Yongcai Guo, Yukun Huang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843I (2016) https://doi.org/10.1117/12.2241373

Read Abstract +

Interferometry measurement of parallel optical plate wavefront Paper

Yi Yang, Huan Ren, Zhendong Shi, Yong Liu, Xu Liu, Quan Yuan, Xiaoyu Yang, Lin Zhang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843J (2016) https://doi.org/10.1117/12.2246099

Read Abstract +

Performance evaluation of laser line scanner for in-process inspection of 3D geometries Paper

Sen Zhou, Jian Xu, Lei Tao, Yu Yan

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843K (2016) https://doi.org/10.1117/12.2241357

Read Abstract +

Large-scale absolute surface reconstruction Paper

Gao-feng Wu, Hai-yang Quan, Wei-hong Song, Yong-qian Wu, Fan Wu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843L (2016) https://doi.org/10.1117/12.2243603

Read Abstract +

TRIZ theory in NEA photocathode preparation system Paper

Jianliang Qiao, Dayong Huang, Xiangjiang Li, Youtang Gao

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843M (2016) https://doi.org/10.1117/12.2244797

Read Abstract +

New design of electronic display system for spectrometer Paper

Ji-peng Huang, Jin-huan Li, Cheng-chang Tang, Zhao-wei Huang, Rui Han, Er-ting Pan, Wei-kun Dai

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843N (2016) https://doi.org/10.1117/12.2243319

Read Abstract +

The effects of Ga incorporation on the crystalline quality of AlInAs metamorphic buffer using x-ray characterization Paper

Y. He, Y. Song, Y. R. Sun, S. Z. Yu, Y. M. Zhao, J. R. Dong

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843O (2016) https://doi.org/10.1117/12.2242556

Read Abstract +

The design and implementation of the full-Stokes imaging spectropolarimeter Paper

Jiankang Zhou, Yiqun Ji, Xinhua Chen, Yuheng Chen, Suodong Ma, Weimin Shen

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843P (2016) https://doi.org/10.1117/12.2242944

Read Abstract +

The imaging spectro-polarimetry combines the spectral imaging technology and the imaging polarization technology. It assembles the functions of camera, spectrometer and polarimeter. So the optical information quantity is increased and the detection efficiency is improved. But the acquirement of the multi-dimensional information results in the detector complex construction and large volume. The moving part is used in the current method to realize the different polarization states or spectral filtering. The images are difficult for registration and the current method can’t be used to get the motion scene. This paper presents innovative imaging spectro-polarimetry method with no moving parts. The hyper-spectral information, full-Stokes polarization information and one-dimensional spatial information are obtained by the polarization modulating and spectrum dispersing. The designed imaging spectro-polarimeter is composed of two parts, a polarization module and the spectral dispersive module. They are all employed stationary configuration. The polarization module includes two birefringent crystal wave plates and a polarizer. The thickness of the birefringent wave-plates and the polarization axes of each component are optimized and the full-Stokes polarization information is loaded on the spectrum. The polarization information can be restored by the Fourier transform. The concentric Offner configuration is adopted for spectral dispersive module. It is composed of two concave spherical mirrors and a holographic aberration-corrected convex grating. The designed dispersive configuration is compact and aligned simply. And high quality linear dispersion, low distortion spectral image are implemented. The Full-stokes imaging spectro-polarimeter our designed is validated by the model simulation and the laboratory experiment. The mixed hyper-spectral information and accuracy polarization information can be obtained.

A novel method using simplified PCNN for near infrared eye detection Paper

Xiaoyan Wu, Yongcai Guo

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843Q (2016) https://doi.org/10.1117/12.2241363

Read Abstract +

A simple method for focal length measurement Paper

Hua Ma, Huan Ren, Lin Zhang, Zhengdong Shi, Quan Yuan, Yi Yang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843R (2016) https://doi.org/10.1117/12.2245081

Read Abstract +

Laser range profile of spheres Paper

Yanjun Gong, Mingjun Wang, Lei Gong

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843S (2016) https://doi.org/10.1117/12.2244569

Read Abstract +

Modeling and simulation of atmosphere interference signal based on FTIR spectroscopy technique Paper

Yugui Zhang, Qiang Li, Zhengyang Yu, Zhengmin Liu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843T (2016) https://doi.org/10.1117/12.2242723

Read Abstract +

Analysis of spectral mismatch error influences on short-circuit current measurement of reference solar cell Paper

Chuan Cai, Yingwei He, Junchao Zhang, Limin Xiong, Taogeng Zhou, Haifeng Meng, Kejia Zhang, Bifeng Zhang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843U (2016) https://doi.org/10.1117/12.2243596

Read Abstract +

Solving surface parameters of conic asphere mirror based on computer simulation Paper

Chuan-ke Huang, Yong-qian Wu, Bin Fan, Bai-ping Lei

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843V (2016) https://doi.org/10.1117/12.2246770

Read Abstract +

Analysis and design of energy monitoring platform for smart city Paper

Hong-xia Wang

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843W (2016) https://doi.org/10.1117/12.2241046

Read Abstract +

Iterative surface construction for blind deflectometry Paper

Wenchuan Zhao, Logan R. Graves, Run Huang, Weihong Song, DaeWook Kim

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843X (2016) https://doi.org/10.1117/12.2243264

Read Abstract +

Automatic estimation of the focusing reconstruction distance of recorded object in digital holography Paper

Hongzhen Jiang, Xu Liu, Yong Liu, Dong Li, Zhu Chen, Fanglan Zheng, Xiaoyu Yang, Bo Chen

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843Y (2016) https://doi.org/10.1117/12.2241949

Read Abstract +

Experimental investigation of laser transmission at 1.06μm in horizontal atmosphere under fine and haze-fog conditions of summer Paper

Kaixin Yin, Chunhong Qiao, Xiaoxing Feng, Pengfei Zhang, Chengyu Fan

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 96843Z (2016) https://doi.org/10.1117/12.2243789

Read Abstract +

Computer-aided alignment method of optical lens with high accuracy Paper

Song Xing, Xiao-hua Hou, Xue-min Zhang, Bin-dong Ji

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968440 (2016) https://doi.org/10.1117/12.2245129

Read Abstract +

Rigid geometric-optics autocollimation model and its theoretical analysis based on ray-tracing method Paper

Fan Zhu, Xinran Tan, Jiubin Tan, Zhigang Fan

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968441 (2016) https://doi.org/10.1117/12.2242768

Read Abstract +

Dual-wavelength method for measuring the thickness of HSQ photoresist Paper

Shun Yao, Bo Yu, Jingcheng Jin, Chun Li

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968442 (2016) https://doi.org/10.1117/12.2246196

Read Abstract +

Noise suppression performance of typical phase shifting algorithms Paper

Xiaoqiang Zhu, Yong-qian Wu, Fengwei Liu

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968443 (2016) https://doi.org/10.1117/12.2243231

Read Abstract +

Analysis of adjustment error in aspheric null testing with CGH Paper

Yiwei He, Hou Xi, Qiang Chen, Fan Wu, Chaoqiang Li, Xiaoqiang Zhu, Weihong Song

Proceedings Volume 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test, Measurement Technology, and Equipment, 968444 (2016) https://doi.org/10.1117/12.2243226

Read Abstract +

Keywords/Phrases

Search In:

Publication Years