Development of high sensitivity and high speed large size blank inspection system LBIS

Shinobu Ohara; Akinori Yoshida; Mitsuo Hirai; Takenori Kato; Koichi Moriizumi; Haruhiko Kusunose

doi:10.1117/12.2284332

13 July 2017 Development of high sensitivity and high speed large size blank inspection system LBIS

Shinobu Ohara, Akinori Yoshida, Mitsuo Hirai, Takenori Kato, Koichi Moriizumi, Haruhiko Kusunose

Author Affiliations +

Proceedings Volume 10454, Photomask Japan 2017: XXIV Symposium on Photomask and Next-Generation Lithography Mask Technology; 1045402 (2017) https://doi.org/10.1117/12.2284332
Event: Photomask Japan 2017, 2017, Yokohama, Japan

Abstract

The production of high-resolution flat panel displays (FPDs) for mobile phones today requires the use of high-quality large-size photomasks (LSPMs). Organic light emitting diode (OLED) displays use several transistors on each pixel for precise current control and, as such, the mask patterns for OLED displays are denser and finer than the patterns for the previous generation displays throughout the entire mask surface. It is therefore strongly demanded that mask patterns be produced with high fidelity and free of defect. To enable the production of a high quality LSPM in a short lead time, the manufacturers need a high-sensitivity high-speed mask blank inspection system that meets the requirement of advanced LSPMs. Lasertec has developed a large-size blank inspection system called LBIS, which achieves high sensitivity based on a laser-scattering technique. LBIS employs a high power laser as its inspection light source. LBIS’s delivery optics, including a scanner and F-Theta scan lens, focus the light from the source linearly on the surface of the blank. Its specially-designed optics collect the light scattered by particles and defects generated during the manufacturing process, such as scratches, on the surface and guide it to photo multiplier tubes (PMTs) with high efficiency. Multiple PMTs are used on LBIS for the stable detection of scattered light, which may be distributed at various angles due to irregular shapes of defects. LBIS captures 0.3mμ PSL at a detection rate of over 99.5% with uniform sensitivity. Its inspection time is 20 minutes for a G8 blank and 35 minutes for G10. The differential interference contrast (DIC) microscope on the inspection head of LBIS captures high-contrast review images after inspection. The images are classified automatically.

Citation Download Citation

Shinobu Ohara, Akinori Yoshida, Mitsuo Hirai, Takenori Kato, Koichi Moriizumi, and Haruhiko Kusunose "Development of high sensitivity and high speed large size blank inspection system LBIS", Proc. SPIE 10454, Photomask Japan 2017: XXIV Symposium on Photomask and Next-Generation Lithography Mask Technology, 1045402 (13 July 2017); https://doi.org/10.1117/12.2284332

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
4 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Inspection

Photomasks

Light scattering

Organic light emitting diodes

Digital image correlation

Laser development

Manufacturing

Show All Keywords

Keywords/Phrases

Search In:

Publication Years