Paper
30 June 1989 Optical Performance Of Replica Beryllium Mirrors
Joel L. Shady, Charles M. Packer, Rao R. Nimmagadda
Author Affiliations +
Proceedings Volume 1050, Infrared Systems and Components III; (1989) https://doi.org/10.1117/12.951443
Event: OE/LASE '89, 1989, Los Angeles, CA, United States
Abstract
The optical performance of physical vapor deposited beryllium mirrors replicated from tantalum-10 tungsten, molybdenum, and stainless steel master molds is being investigated. In this developmental replication process, a carbon release agent and then a layer of beryllium oxide are deposited on the master mold prior to beryllium deposition for crack-free mirror separation of the mirror from the master mold. The correlation of both optical figure and bidirectional reflectance distribution function (BRDF) between the beryllium mirrors and the master molds from which they were replicated is being experimentally determined. The reflectance of the mirrors replicated from the various master mold materials has been tested. Finally, thermal cycling of the replicated mirrors at cryogenic temperatures produces little change in BRDF values, but the optical figure changes indicate the need to remove the residual stress in the current replica beryllium mirrors. This technology development effort may lead to the fabrication of high-quality, low-scatter beryllium mirrors at a reasonable production rate.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joel L. Shady, Charles M. Packer, and Rao R. Nimmagadda "Optical Performance Of Replica Beryllium Mirrors", Proc. SPIE 1050, Infrared Systems and Components III, (30 June 1989); https://doi.org/10.1117/12.951443
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Beryllium

Bidirectional reflectance transmission function

Molybdenum

Reflectivity

Infrared imaging

Infrared radiation

RELATED CONTENT

Thick, fine-grained beryllium optical coatings
Proceedings of SPIE (September 01 1991)
Design and optical performance of beryllium assessment mirrors
Proceedings of SPIE (September 01 1991)
10.6 um Mirror Reflectivities
Proceedings of SPIE (January 15 1976)
Scattering by anisotropic grains in beryllium mirrors
Proceedings of SPIE (December 01 1990)

Back to Top