Paper
23 October 2018 Prelaunch and on-orbit electronic calibration for Earth-observing instruments
Amit Angal, Xiaoxiong Xiong, Jeff McIntire, Na Chen, Hassan Oudrari
Author Affiliations +
Abstract
The Electronic Calibration (Ecal) tests are performed during various stages of instrument development to examine the linearity of the instrument electronics. During this process, charges with stepwise increments are injected in the analog electronics circuitry to generate a ramp signal that can be used to characterize any nonlinearities in the electronics. The prelaunch characterization of MODIS (on the Terra and Aqua platforms) and VIIRS (on SNPP, JPSS-1 and JPSS-2) involved a regular evaluation of the electronics linearity using the Ecal tests. On orbit, the Ecal tests have been regularly performed over the mission for both the MODIS instruments to derive the electronics gain and linearity. Unlike MODIS, the Ecal tests on the VIIRS instruments are performed on an as-needed basis. To date, no Ecal tests were performed for S-NPP VIIRS on orbit. The VIIRS instrument on JPSS-1 (now NOAA 20) was launched on November 18, 2017. An Ecal test was performed to support the instruments initial post-launch performance assessment. Shortly after the
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Amit Angal, Xiaoxiong Xiong, Jeff McIntire, Na Chen, and Hassan Oudrari "Prelaunch and on-orbit electronic calibration for Earth-observing instruments", Proc. SPIE 10781, Earth Observing Missions and Sensors: Development, Implementation, and Characterization V, 107811D (23 October 2018); https://doi.org/10.1117/12.2500057
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
MODIS

Sensors

Calibration

Photovoltaics

Long wavelength infrared

Analog electronics

Signal processing

Back to Top