Paper
7 March 2019 Narrow-linewidth all-solid large-mode-area photonic crystal fiber amplifier
Jakob M. Hauge, Sidsel R. Papior, Jens E. Pedersen, Simon L. Christensen, Magalie Bondu, Thomas T. Alkeskjold, Jesper Lægsgaard
Author Affiliations +
Abstract
Large-mode-area (LMA) photonic crystal fiber (PCF) amplifiers are attractive for high-power amplification of single-mode (SM) narrow-linewidth light. Traditionally, LMA PCF designs include air holes but splicing and interfacing of fibers with air holes is complicated. Recently, this was addressed with the development of a LMA PCF amplifier fiber without air holes but with SM operation maintained. This all-solid fiber can be spliced with standard splicers and thus enables integration of PCFs into all-fiber monolithic laser systems. The new fiber, named DC-250/30-PM-Yb-FUD, is demonstrated in a free-space configuration for high-power amplification of 1064 nm light with a narrow linewidth of less than 20 kHz. A seed power of 380 mW is amplified to 40 W, corresponding to a single-stage gain of 20 dB, with an optical to optical efficiency of 69%. No indication of stimulated Brillouin scattering is observed, and the output is stable during frequency modulation of the seed laser.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jakob M. Hauge, Sidsel R. Papior, Jens E. Pedersen, Simon L. Christensen, Magalie Bondu, Thomas T. Alkeskjold, and Jesper Lægsgaard "Narrow-linewidth all-solid large-mode-area photonic crystal fiber amplifier", Proc. SPIE 10897, Fiber Lasers XVI: Technology and Systems, 1089728 (7 March 2019); https://doi.org/10.1117/12.2506246
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Optical amplifiers

Photonic crystal fibers

Fiber amplifiers

Amplifiers

Frequency modulation

High power fiber amplifiers

Back to Top