Paper
18 December 2019 Multipoint strain sensing system based on fiber loop ringdown and frequency-shifted interferometry
Author Affiliations +
Proceedings Volume 11338, AOPC 2019: Optical Sensing and Imaging Technology; 113380O (2019) https://doi.org/10.1117/12.2541914
Event: Applied Optics and Photonics China (AOPC2019), 2019, Beijing, China
Abstract
We proposed a novel multipoint sensing method for large strain measurement combined fiber loop ringdown (FLRD) and frequency-shifted interferometry (FSI). Using this method, a biconical tapered multimode fiber was used as a sensor head for large strain measurement and a serial dual-point strain sensing system was experimentally validated. By measuring the ringdown distance of each FSI-FLRD strain sensor, the strain and position of each sensor can be simultaneously obtained. Using such strain sensors, the strain sensitivities of 0.51337 km-1·mε-1 and 0.8667 km-1·mε-1 within a large measurement range of up to 6 mε were achieved.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zehao Chen, Chunfu Cheng, Yiwen Ou, Zhangyong Yang, Jiaxuan Chen, and Hui Lv "Multipoint strain sensing system based on fiber loop ringdown and frequency-shifted interferometry", Proc. SPIE 11338, AOPC 2019: Optical Sensing and Imaging Technology, 113380O (18 December 2019); https://doi.org/10.1117/12.2541914
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Sensing systems

Interferometry

Data acquisition

Multimode fibers

Signal detection

Back to Top