Paper
8 January 1990 Mitsubishi Thermal Imager Using The 512x512 PtSi Focal Plane Arrays
Shotaro Fujino, Tetsuo Miyoshi, Masataka Yokoh, Teruyoshi Kitahara
Author Affiliations +
Abstract
MITSUBISHI THERMAL IMAGER model IR-5120A is high resolution and high sensitivity infrared television imaging system. It was exhibited in SPIE'S 1988 Technical Symposium on OPTICS, ELECTRO-OPTICS, and SENSORS, held at April 1988 Orlando, and acquired interest of many attendants of the symposium for it's high performance. The detector is a Platinium Silicide Charge Sweep Device (CSD) array containing more than 260,000 individual pixels manufactured by Mitsubishi Electric Co. The IR-5120A consists of a Camera Head. containing the CSD, a stirling cycle cooler and support electronics, and a Camera Control Unit containing the pixel fixed pattern noise corrector, video controllor, cooler driver and support power supplies. The stirling cycle cooler built into the Camera Head is used for keeping CSD temperature of approx. 80K with the features such as light weight, long life of more than 2000 hours and low acoustical noise. This paper describes an improved Thermal Imager, with more light weight, compact size and higher performance, and it's design philosophy, characteristics and field image.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shotaro Fujino, Tetsuo Miyoshi, Masataka Yokoh, and Teruyoshi Kitahara "Mitsubishi Thermal Imager Using The 512x512 PtSi Focal Plane Arrays", Proc. SPIE 1157, Infrared Technology XV, (8 January 1990); https://doi.org/10.1117/12.978590
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Thermography

Infrared imaging

Head

Sensors

Image sensors

Infrared radiation

Back to Top