Paper
23 February 1990 Resistless Pattern Etching of SiC by Excimer Laser
Masataka Murahara
Author Affiliations +
Proceedings Volume 1190, Laser/Optical Processing of Electronic Materials; (1990) https://doi.org/10.1117/12.963987
Event: 1989 Microelectronic Integrated Processing Conferences, 1989, Santa Clara, United States
Abstract
Resistless photo etching of the SiC was performed by using KrF excimer laser beams. In the present method, C1F3 was used for etchant gas. The C1F3 gas has the absorption band in the range between 200 and 400 nm. Therefore, C.1F3 gas is effectively decomposed by the XeF,KrF and ArF excimer lasers irradiation. It is found that absorption factor of SiC is about 50% in, the range of between 200 and 400 nm, and that the bonding energy of Si-C is lower than the photon energy of KrF laser beam. The above results indicate the direct decomposition of Si-C bond. On the other hand, KrF laser beams were simultaneously irradiated parallel and perpendicular to the substrate. The parallel beam induced decomposition of CIF: near the surface of a substrate to produce radicals and the perpendicular beam induced on the surface of the SiC substrate. Fluence of parallel beam was 50 mJ/cm2 , perpendicular beam on the substrate was 200 mJ/cm2 and a total flow rates through the cell were 0.05 1/min. The etched feature of reticle pattern can be fabricated by reductive projection. Line and space was 5 μm.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Masataka Murahara "Resistless Pattern Etching of SiC by Excimer Laser", Proc. SPIE 1190, Laser/Optical Processing of Electronic Materials, (23 February 1990); https://doi.org/10.1117/12.963987
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon carbide

Etching

Excimer lasers

Crystals

Absorption

Silicon

Laser irradiation

Back to Top