Paper
19 November 2021 Different measuring methods of REVO five-axis coordinate measuring machine
Author Affiliations +
Proceedings Volume 12059, Tenth International Symposium on Precision Mechanical Measurements; 120591P (2021) https://doi.org/10.1117/12.2613428
Event: Tenth International Symposium on Precision Mechanical Measurements, 2021, Qingdao, China
Abstract
REVO head is a high efficiency and accuracy five-axis measuring system designed and applied on coordinate measuring machine. It is now widely used in the measurement of precision parts of aircraft engine. As a high precision and high efficiency measurement system, the accuracy of the measurement result can only be guaranteed, in the case of ensuing the correctness of the measurement methods. This papers presents two measurement methods of REVO five-axis head based on coordinate measuring machine, using an NPL designed and manufactured freeform material standard consisting of an aluminium block with geometric shaped blended to form a pseudo freeform surface as a measurement example. By comparing the result of REVO five-axis head CMM and the result given by NPL. The accuracy of the measurement method can be verified. And then combined with the results, this paper explores how to better ensure the accuracy of measurement results. This has profound effect on future precision-parts measurement.
© (2021) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhuoran Wang, Xiaomei He, and Yizhang Wang "Different measuring methods of REVO five-axis coordinate measuring machine", Proc. SPIE 12059, Tenth International Symposium on Precision Mechanical Measurements, 120591P (19 November 2021); https://doi.org/10.1117/12.2613428
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Nanolithography

Optical spheres

Head

Precision measurement

Standards development

Aluminum

Design for manufacturability

RELATED CONTENT

Molding large diameter chalcogenide spheres
Proceedings of SPIE (January 01 1900)
Diamonds, Air Bearings, And Optics
Proceedings of SPIE (October 27 1978)
Study of the higher order Lamb resonances on elastic shells...
Proceedings of SPIE (September 16 1992)
Precision Mechanical Measurement Of Deep Aspherical Optics
Proceedings of SPIE (January 01 1987)
Generation Of Off-Axis Aspherics
Proceedings of SPIE (November 04 1982)

Back to Top