Paper
1 August 1990 Automated measurement of the EUREKA EU213 excimer laser pulse-forming line
Allan D. Boardman, Elizabeth M. Hodgson, A. J. Spence, M. Wilkins, Jian Wu, J. A. Ashton
Author Affiliations +
Proceedings Volume 1278, Excimer Lasers and Applications II; (1990) https://doi.org/10.1117/12.20600
Event: The International Congress on Optical Science and Engineering, 1990, The Hague, Netherlands
Abstract
This paper describes part of the EUREKA Eurolaser project EU213, to build an excimer laser. The emphasis is on control and monitoring systems. The performance of a test-bed laser built at Salford will be described. In the design discussed, two voltage components are generated separately and combined at the laser head to form a pumping pulse. A "magnetic switch" is used to isolate the two parts of the transmission line'. A theoretical analysis of the sustainer section of the line has been carried out and compared with measurements made using a dummy load in place of the laser head. A control system is discussed that is being developed to monitor the shape of each laser pulse at a high repetition rate. The control system is designed to protect the laser from damage. The construction of various conventional probes, and the progress towards various fibre probes will be reported with emphasis on measuring fast current pulses on the various parts of the line.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Allan D. Boardman, Elizabeth M. Hodgson, A. J. Spence, M. Wilkins, Jian Wu, and J. A. Ashton "Automated measurement of the EUREKA EU213 excimer laser pulse-forming line", Proc. SPIE 1278, Excimer Lasers and Applications II, (1 August 1990); https://doi.org/10.1117/12.20600
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Excimer lasers

Sensors

Control systems

Pulsed laser operation

Magnetism

Optical fibers

Electrodes

RELATED CONTENT


Back to Top