Presentation + Paper
6 June 2024 Countering environmental effects in optical systems using Kapton tape
Joshua B. Bettinger, Steven Vogel, Andrew Dugrenier
Author Affiliations +
Abstract
Optical systems are frequently used in non-laboratory environments. Extra-orbit launch accelerations, gunfire vibrations, and temperature fluctuations can put dangerous stresses on lenses. In addition to general mechanical ruggedization, Kapton® tape was added to optical surfaces as a go-between for the glass/crystal and the metal structure components. The thought behind this was that using a softer surface interface would act as a sort of cushion for the optics. Kapton® tape has a CTE nearly matching that of Aluminum 6061-T6 and has an effective temperature range of -269°C to 400°C, which makes it an ideal material for use in systems both at or outside of room temperature values. Hand calculations formulated from equations postulated by experts Paul Yoder and R.J. Roark were used in conjunction with Finite Element Analysis via ANSYS. Practical examples used in the field were cited as well.
Conference Presentation
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Joshua B. Bettinger, Steven Vogel, and Andrew Dugrenier "Countering environmental effects in optical systems using Kapton tape", Proc. SPIE 13062, Sensors and Systems for Space Applications XVII, 1306205 (6 June 2024); https://doi.org/10.1117/12.3013786
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Compliance

Optical spheres

Interfaces

Safety

Optical surfaces

Glasses

Optical components

Back to Top