Development of atomically thin optical devices with graphene for astronomical applications

Ryoya Tago; Ikuyuki Mitsuishi; Kazuto Kashiwakura; Yoshimi Niwa; Tomoyo Ogawa; Midori Hirota; Yuzuru Tawara; Kimitaka Higuchi; Haruka Omachi; Ryo Kitaura; Kenji Kawahara; Hiroki Ago; Kentaro Nomoto; Sadayuki Shimizu; Kazuyuki Tsuruoka; Masahito Tagawa

doi:10.1117/12.3020847

21 August 2024 Development of atomically thin optical devices with graphene for astronomical applications

Ryoya Tago, Ikuyuki Mitsuishi, Kazuto Kashiwakura, Yoshimi Niwa, Tomoyo Ogawa, Midori Hirota, Yuzuru Tawara, Kimitaka Higuchi, Haruka Omachi, Ryo Kitaura, Kenji Kawahara, Hiroki Ago, Kentaro Nomoto, Sadayuki Shimizu, Kazuyuki Tsuruoka, Masahito Tagawa

Author Affiliations +

Proceedings Volume 13093, Space Telescopes and Instrumentation 2024: Ultraviolet to Gamma Ray; 130935U (2024) https://doi.org/10.1117/12.3020847
Event: SPIE Astronomical Telescopes + Instrumentation, 2024, Yokohama, Japan

Conference Poster

Abstract

High-speed atomic oxygen (AO) irradiation tests were performed for free-standing graphene membranes to investigate the degradation in terms of mechanical intensity for astronomical applications. The high-speed AO was irradiated with a typical velocity of 5 km/s and fluence values of 3×10¹⁵, 1×10¹⁶, 3×10¹⁶, and 1×10¹⁷ atoms/cm². Two kinds of samples were prepared using single- and bi-layer graphene sheets with through-hole patterns with diameters of 10 μm and 10-200 μm, respectively. Consequently, the yield rate is found to be approximately 90% and 100% for the single- and bi-layer freestanding graphene samples, respectively. Almost all ruptured events occurred after the minimum fluence of 3E+15 atoms/cm². The results suggest that the lifetime of the free-standing graphene structure can be longer by increasing the number of layers or any other causes such as accelerated metal outgassing contaminants remaining the vacuum chamber and detonation waves are not negligible and almost no damages are seen through the high-speed AO irradiation up to the fluence value of 1×10¹⁷ atoms/cm². To improve the sensitivity, our original transfer method was introduced and we fabricated 300 / 900 μm diameter free-standing single- / bi-layer graphene structures successfully. Additionally, we confirmed that our technique can be applied to ground-based applications such as high-sensitivity graphene Transmission Electron Microscopy (TEM) support films.

(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

Ryoya Tago, Ikuyuki Mitsuishi, Kazuto Kashiwakura, Yoshimi Niwa, Tomoyo Ogawa, Midori Hirota, Yuzuru Tawara, Kimitaka Higuchi, Haruka Omachi, Ryo Kitaura, Kenji Kawahara, Hiroki Ago, Kentaro Nomoto, Sadayuki Shimizu, Kazuyuki Tsuruoka, and Masahito Tagawa "Development of atomically thin optical devices with graphene for astronomical applications", Proc. SPIE 13093, Space Telescopes and Instrumentation 2024: Ultraviolet to Gamma Ray, 130935U (21 August 2024); https://doi.org/10.1117/12.3020847

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE