Paper
1 November 1990 Design and fabrication of high damage threshold turning mirrors for the Nova laser
C. Robert Wolfe, Mark R. Kozlowski, F. Thomas Marchi, Frank Rainer, Edward A. Enemark
Author Affiliations +
Abstract
Laser induced damage to optical components severely limits the operating fluence of high peak power lasers used for fusion research such as the Nova laser at the Lawrence Livermore National Laboratory. In particular, surfaces and optical thin films often damage at a lower fluence than bulk materials in large aperture, high quality optics. We have designed and are fabricating new 94 cm turning mirrors for Nova as part of the "Precision Nova" program to improve beam quality. A new design has been optimized for updated optical performance specifications including increased damage resistance. The new mirror design will operate at all turning angles required by the ten Nova beamlines. This flexibility reduces mirror inventory and fabrication cost. A process of "conditioning" the mirror coating has been developed that is permanent and increases the damage threshold by as much as a factor of 2-3x.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. Robert Wolfe, Mark R. Kozlowski, F. Thomas Marchi, Frank Rainer, and Edward A. Enemark "Design and fabrication of high damage threshold turning mirrors for the Nova laser", Proc. SPIE 1334, Current Developments in Optical Engineering IV, (1 November 1990); https://doi.org/10.1117/12.22838
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Laser damage threshold

Coating

Reflectivity

Raster graphics

Thin films

Optical engineering

Back to Top