Paper
25 November 1992 Visual sensing and range measurement by scanning of carbon dioxide laser
Koichi Kawata, Hidemi Takahashi, Osamu Yamada, Minoru Kimura, Hiroshi Naito
Author Affiliations +
Abstract
A laser vision sensor has been developed to enable range measurement and identification of targets through flames, smoke, and fog which are invisible to the human eye. This vision sensor employs a 10.6 micrometers -wavelength carbon dioxide laser for its long wavelength. The target is scanned two-dimensionally by the laser beam, directed by a pair of galvanometer mirrors, to produce the target image and measure the range of the target. The laser beam, amplitude-modulated to 5 MHz with an electro-optic modulator, is projected onto a target, and the reflected beam is detected by a cadmium mercury telluride detector. The phase difference between the projected and reflected light signals is used to provide range data up to 30 m. The indoor test is carried out with a 1 cubic meter box in which flames, smoke, and fog can be generated. The laser beam is projected through this box, and the targets behind this box are detected. The reproduced image is sufficient for identification through flames, smoke, and fog.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Koichi Kawata, Hidemi Takahashi, Osamu Yamada, Minoru Kimura, and Hiroshi Naito "Visual sensing and range measurement by scanning of carbon dioxide laser", Proc. SPIE 1697, Acquisition, Tracking, and Pointing VI, (25 November 1992); https://doi.org/10.1117/12.138169
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Carbon dioxide lasers

Sensors

Transmittance

Modulation

Fiber optic gyroscopes

Signal detection

Target detection

RELATED CONTENT

Compressive full-waveform LIDAR with low-cost sensor
Proceedings of SPIE (October 31 2016)
Infrared Range Imaging
Proceedings of SPIE (August 09 1983)
Digital Simulation Of Reticle-Systems
Proceedings of SPIE (December 23 1980)

Back to Top